Sandbox Stdout

standard output of sandbox bootstrap

Makefile shortcuts and their expected outputs

Overview

# Clone the repo and enter it
cd /tmp && git clone git@github.com:Vonng/pigsty.git && cd pigsty

make up         # 拉起vagrant虚拟机
make ssh        # 配置虚拟机ssh访问      【单次，下次启动无需再次执行】
sudo make dns   # 写入Pigsty静态DNS域名  【sudo输入密码，可选，单次】
make download   # 下载最新离线软件包      【可选，可显著加速初始化】
make upload     # 将离线软件包上传至元节点
make init       # 初始化Pigsty
make mon-view   # 打开Pigsty监控首页（默认用户密码：admin:admin）

clone

克隆并进入项目目录，后续操作均位于项目根目录中（以/tmp/pigsty为例）

cd /tmp && git clone git@github.com:Vonng/pigsty.git && cd pigsty

clean

清理所有的沙箱痕迹（如果有）

$ make clean
cd vagrant && vagrant destroy -f --parallel; exit 0
==> vagrant: A new version of Vagrant is available: 2.2.14 (installed version: 2.2.13)!
==> vagrant: To upgrade visit: https://www.vagrantup.com/downloads.html

==> node-3: Forcing shutdown of VM...
==> node-3: Destroying VM and associated drives...
==> node-2: Forcing shutdown of VM...
==> node-2: Destroying VM and associated drives...
==> node-1: Forcing shutdown of VM...
==> node-1: Destroying VM and associated drives...
==> meta: Forcing shutdown of VM...
==> meta: Destroying VM and associated drives...

up

执行make up将调用vagrant up命令，根据Vagrantfile中的定义，使用Virtualbox创建四台虚拟机。

请注意第一次执行vagrant up时，软件会自动从官网下载 CentOS/7 的虚拟机镜像。如果您的网络状况不佳（例如没有FQ代理），则可能需要等待相当长的一段时间。您也可以选择自己创建虚拟机，并根据部署一章的说明进行Pigsty部署（不建议）。

$ make up
cd vagrant && vagrant up
Bringing machine 'meta' up with 'virtualbox' provider...
Bringing machine 'node-1' up with 'virtualbox' provider...
Bringing machine 'node-2' up with 'virtualbox' provider...
Bringing machine 'node-3' up with 'virtualbox' provider...
==> meta: Cloning VM...
==> meta: Matching MAC address for NAT networking...
==> meta: Setting the name of the VM: vagrant_meta_1614587906789_29514
==> meta: Clearing any previously set network interfaces...
==> meta: Preparing network interfaces based on configuration...
    meta: Adapter 1: nat
    meta: Adapter 2: hostonly
==> meta: Forwarding ports...
    meta: 22 (guest) => 2222 (host) (adapter 1)
==> meta: Running 'pre-boot' VM customizations...
==> meta: Booting VM...
==> meta: Waiting for machine to boot. This may take a few minutes...
    meta: SSH address: 127.0.0.1:2222
    meta: SSH username: vagrant
    meta: SSH auth method: private key
==> meta: Machine booted and ready!
==> meta: Checking for guest additions in VM...
    meta: No guest additions were detected on the base box for this VM! Guest
    meta: additions are required for forwarded ports, shared folders, host only
    meta: networking, and more. If SSH fails on this machine, please install
    meta: the guest additions and repackage the box to continue.
    meta:
    meta: This is not an error message; everything may continue to work properly,
    meta: in which case you may ignore this message.
==> meta: Setting hostname...
==> meta: Configuring and enabling network interfaces...
==> meta: Rsyncing folder: /Volumes/Data/pigsty/vagrant/ => /vagrant
==> meta: Running provisioner: shell...
    meta: Running: /var/folders/_5/_0mbf4292pl9y4xgy0kn2r1h0000gn/T/vagrant-shell20210301-60046-1jv6obp.sh
    meta: [INFO] write ssh config to /home/vagrant/.ssh
==> node-1: Cloning VM...
==> node-1: Matching MAC address for NAT networking...
==> node-1: Setting the name of the VM: vagrant_node-1_1614587930603_84690
==> node-1: Fixed port collision for 22 => 2222. Now on port 2200.
==> node-1: Clearing any previously set network interfaces...
==> node-1: Preparing network interfaces based on configuration...
    node-1: Adapter 1: nat
    node-1: Adapter 2: hostonly
==> node-1: Forwarding ports...
    node-1: 22 (guest) => 2200 (host) (adapter 1)
==> node-1: Running 'pre-boot' VM customizations...
==> node-1: Booting VM...
==> node-1: Waiting for machine to boot. This may take a few minutes...
    node-1: SSH address: 127.0.0.1:2200
    node-1: SSH username: vagrant
    node-1: SSH auth method: private key
==> node-1: Machine booted and ready!
==> node-1: Checking for guest additions in VM...
    node-1: No guest additions were detected on the base box for this VM! Guest
    node-1: additions are required for forwarded ports, shared folders, host only
    node-1: networking, and more. If SSH fails on this machine, please install
    node-1: the guest additions and repackage the box to continue.
    node-1:
    node-1: This is not an error message; everything may continue to work properly,
    node-1: in which case you may ignore this message.
==> node-1: Setting hostname...
==> node-1: Configuring and enabling network interfaces...
==> node-1: Rsyncing folder: /Volumes/Data/pigsty/vagrant/ => /vagrant
==> node-1: Running provisioner: shell...
    node-1: Running: /var/folders/_5/_0mbf4292pl9y4xgy0kn2r1h0000gn/T/vagrant-shell20210301-60046-5w83e1.sh
    node-1: [INFO] write ssh config to /home/vagrant/.ssh
==> node-2: Cloning VM...
==> node-2: Matching MAC address for NAT networking...
==> node-2: Setting the name of the VM: vagrant_node-2_1614587953786_32441
==> node-2: Fixed port collision for 22 => 2222. Now on port 2201.
==> node-2: Clearing any previously set network interfaces...
==> node-2: Preparing network interfaces based on configuration...
    node-2: Adapter 1: nat
    node-2: Adapter 2: hostonly
==> node-2: Forwarding ports...
    node-2: 22 (guest) => 2201 (host) (adapter 1)
==> node-2: Running 'pre-boot' VM customizations...
==> node-2: Booting VM...
==> node-2: Waiting for machine to boot. This may take a few minutes...
    node-2: SSH address: 127.0.0.1:2201
    node-2: SSH username: vagrant
    node-2: SSH auth method: private key
==> node-2: Machine booted and ready!
==> node-2: Checking for guest additions in VM...
    node-2: No guest additions were detected on the base box for this VM! Guest
    node-2: additions are required for forwarded ports, shared folders, host only
    node-2: networking, and more. If SSH fails on this machine, please install
    node-2: the guest additions and repackage the box to continue.
    node-2:
    node-2: This is not an error message; everything may continue to work properly,
    node-2: in which case you may ignore this message.
==> node-2: Setting hostname...
==> node-2: Configuring and enabling network interfaces...
==> node-2: Rsyncing folder: /Volumes/Data/pigsty/vagrant/ => /vagrant
==> node-2: Running provisioner: shell...
    node-2: Running: /var/folders/_5/_0mbf4292pl9y4xgy0kn2r1h0000gn/T/vagrant-shell20210301-60046-1xljcde.sh
    node-2: [INFO] write ssh config to /home/vagrant/.ssh
==> node-3: Cloning VM...
==> node-3: Matching MAC address for NAT networking...
==> node-3: Setting the name of the VM: vagrant_node-3_1614587977533_52921
==> node-3: Fixed port collision for 22 => 2222. Now on port 2202.
==> node-3: Clearing any previously set network interfaces...
==> node-3: Preparing network interfaces based on configuration...
    node-3: Adapter 1: nat
    node-3: Adapter 2: hostonly
==> node-3: Forwarding ports...
    node-3: 22 (guest) => 2202 (host) (adapter 1)
==> node-3: Running 'pre-boot' VM customizations...
==> node-3: Booting VM...
==> node-3: Waiting for machine to boot. This may take a few minutes...
    node-3: SSH address: 127.0.0.1:2202
    node-3: SSH username: vagrant
    node-3: SSH auth method: private key
==> node-3: Machine booted and ready!
==> node-3: Checking for guest additions in VM...
    node-3: No guest additions were detected on the base box for this VM! Guest
    node-3: additions are required for forwarded ports, shared folders, host only
    node-3: networking, and more. If SSH fails on this machine, please install
    node-3: the guest additions and repackage the box to continue.
    node-3:
    node-3: This is not an error message; everything may continue to work properly,
    node-3: in which case you may ignore this message.
==> node-3: Setting hostname...
==> node-3: Configuring and enabling network interfaces...
==> node-3: Rsyncing folder: /Volumes/Data/pigsty/vagrant/ => /vagrant
==> node-3: Running provisioner: shell...
    node-3: Running: /var/folders/_5/_0mbf4292pl9y4xgy0kn2r1h0000gn/T/vagrant-shell20210301-60046-1cykx8o.sh
    node-3: [INFO] write ssh config to /home/vagrant/.ssh

ssh

新拉起的虚拟机默认用户为vagrant，需要配置本机到虚拟机的免密ssh访问。执行make ssh命令将调用vagrant的ssh-config命令，将pigsty虚拟机节点的ssh配置文件写入~/.ssh/pigsty_config。

通常该命令只需要在首次启动沙箱时执行一次，后续重新拉起的虚拟机通常会保有相同的SSH配置。

执行完毕后，用户才可以使用类似ssh node-1的方式通过SSH别名连接至沙箱内的虚拟机节点。

$ make ssh
cd vagrant && vagrant ssh-config > ~/.ssh/pigsty_config 2>/dev/null; true
if ! grep --quiet "pigsty_config" ~/.ssh/config ; then (echo 'Include ~/.ssh/pigsty_config' && cat ~/.ssh/config) >  ~/.ssh/config.tmp; mv ~/.ssh/config.tmp ~/.ssh/config && chmod 0600 ~/.ssh/config; fi
if ! grep --quiet "StrictHostKeyChecking=no" ~/.ssh/config ; then (echo 'StrictHostKeyChecking=no' && cat ~/.ssh/config) >  ~/.ssh/config.tmp; mv ~/.ssh/config.tmp ~/.ssh/config && chmod 0600 ~/.ssh/config; fi

dns

此命令将Pigsty沙箱虚拟机的静态DNS配置写入/etc/hosts，通常该命令只需要在首次启动沙箱时执行一次。

执行完毕后，用户才可以从本地浏览器使用域名访问 http://g.pigsty 等WebUI。

注意DNS命令需要SUDO权限执行，需要输入密码，因为/etc/hosts文件需要特权方可修改。

$ sudo make dns
Password: #<在此输入用户密码>
if ! grep --quiet "pigsty dns records" /etc/hosts ; then cat files/dns >> /etc/hosts; fi

download

从CDN下载最新的Pigsty离线安装包至本地，大小约1GB，约1分钟下载完成。

$ make download
curl http://pigsty-1304147732.cos.accelerate.myqcloud.com/pkg.tgz -o files/pkg.tgz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1067M  100 1067M    0     0  15.2M      0  0:01:10  0:01:10 --:--:-- 29.0M

Pigsty是一个复杂的软件系统，为了确保系统的稳定，Pigsty会在初始化过程中从互联网下载所有依赖的软件包并建立本地Yum源。

所有依赖的软件总大小约1GB左右，下载速度取决于您的网络情况。尽管Pigsty已经尽量使用镜像源以加速下载，但少量包的下载仍可能受到防火墙的阻挠，可能出现非常慢的情况。您可以通过proxy_env配置项设置下载代理以完成首次下载，或直接下载预先打包好的离线安装包。

CDN Download：http://pigsty-1304147732.cos.accelerate.myqcloud.com/pkg.tgz

您也可以手工下载好后放置于files/pkg.tgz。

upload

将下载的离线安装包上传元节点并解压，加速后续初始化。

$ make upload
ssh -t meta "sudo rm -rf /tmp/pkg.tgz"
Connection to 127.0.0.1 closed.
scp -r files/pkg.tgz meta:/tmp/pkg.tgz
pkg.tgz                                                                                                                                                                 100% 1068MB  53.4MB/s   00:19
ssh -t meta "sudo mkdir -p /www/pigsty/; sudo rm -rf /www/pigsty/*; sudo tar -xf /tmp/pkg.tgz --strip-component=1 -C /www/pigsty/"
Connection to 127.0.0.1 closed.

init

完成上述操作后，执行make init即会调用ansible完成Pigsty系统的初始化。

$ make init
./sandbox.yml   # 快速初始化，并行初始化元节点与普通数据库节点

sandbox.yml是专门为本地沙箱环境准备的初始化剧本，通过同时初始化元节点和数据库节点节省了一半时间。生产环境建议使用infra.yml与pgsql.yml分别依次完成元节点与普通节点的初始化。

如果您已经将离线安装包上传至元节点，那么初始化环境会比较快，视机器配置可能总共需要5～10分钟不等。

若离线安装包不存在，那么Pigsty会在初始化过程中从互联网下载约1GB数据，视网络条件可能需要20分钟或更久。

$ make init
./sandbox.yml                       # interleave sandbox provisioning
[WARNING]: Invalid characters were found in group names but not replaced, use -vvvv to see details

PLAY [Init local repo] ***********************************************************************************************************************************************************************************

TASK [repo : Create local repo directory] ****************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [repo : Backup & remove existing repos] *************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [repo : Add required upstream repos] ****************************************************************************************************************************************************************
[WARNING]: Using a variable for a task's 'args' is unsafe in some situations (see https://docs.ansible.com/ansible/devel/reference_appendices/faq.html#argsplat-unsafe)
changed: [10.10.10.10] => (item={'name': 'base', 'description': 'CentOS-$releasever - Base - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/os/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
changed: [10.10.10.10] => (item={'name': 'updates', 'description': 'CentOS-$releasever - Updates - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/updates/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
changed: [10.10.10.10] => (item={'name': 'extras', 'description': 'CentOS-$releasever - Extras - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
changed: [10.10.10.10] => (item={'name': 'epel', 'description': 'CentOS $releasever - EPEL - Aliyun Mirror', 'baseurl': 'http://mirrors.aliyun.com/epel/$releasever/$basearch', 'gpgcheck': False, 'failovermethod': 'priority'})
changed: [10.10.10.10] => (item={'name': 'grafana', 'description': 'Grafana - TsingHua Mirror', 'gpgcheck': False, 'baseurl': 'https://mirrors.tuna.tsinghua.edu.cn/grafana/yum/rpm'})
changed: [10.10.10.10] => (item={'name': 'prometheus', 'description': 'Prometheus and exporters', 'gpgcheck': False, 'baseurl': 'https://packagecloud.io/prometheus-rpm/release/el/$releasever/$basearch'})
changed: [10.10.10.10] => (item={'name': 'pgdg-common', 'description': 'PostgreSQL common RPMs for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch'})
changed: [10.10.10.10] => (item={'name': 'pgdg13', 'description': 'PostgreSQL 13 for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/13/redhat/rhel-$releasever-$basearch'})
changed: [10.10.10.10] => (item={'name': 'centos-sclo', 'description': 'CentOS-$releasever - SCLo', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-sclo'})
changed: [10.10.10.10] => (item={'name': 'centos-sclo-rh', 'description': 'CentOS-$releasever - SCLo rh', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-rh'})
changed: [10.10.10.10] => (item={'name': 'nginx', 'description': 'Nginx Official Yum Repo', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'http://nginx.org/packages/centos/$releasever/$basearch/'})
changed: [10.10.10.10] => (item={'name': 'haproxy', 'description': 'Copr repo for haproxy', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/roidelapluie/haproxy/epel-$releasever-$basearch/'})
changed: [10.10.10.10] => (item={'name': 'harbottle', 'description': 'Copr repo for main owned by harbottle', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/harbottle/main/epel-$releasever-$basearch/'})

TASK [repo : Check repo pkgs cache exists] ***************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [repo : Set fact whether repo_exists] ***************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [repo : Move upstream repo to backup] ***************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [repo : Add local file system repos] ****************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [repo : Remake yum cache if not exists] *************************************************************************************************************************************************************
[WARNING]: Consider using the yum module rather than running 'yum'.  If you need to use command because yum is insufficient you can add 'warn: false' to this command task or set
'command_warnings=False' in ansible.cfg to get rid of this message.
changed: [10.10.10.10]

TASK [repo : Install repo bootstrap packages] ************************************************************************************************************************************************************
changed: [10.10.10.10] => (item=['yum-utils', 'createrepo', 'ansible', 'nginx', 'wget'])

TASK [repo : Render repo nginx server files] *************************************************************************************************************************************************************
changed: [10.10.10.10] => (item={'src': 'index.html.j2', 'dest': '/www/index.html'})
changed: [10.10.10.10] => (item={'src': 'default.conf.j2', 'dest': '/etc/nginx/conf.d/default.conf'})
changed: [10.10.10.10] => (item={'src': 'local.repo.j2', 'dest': '/www/pigsty.repo'})
changed: [10.10.10.10] => (item={'src': 'nginx.conf.j2', 'dest': '/etc/nginx/nginx.conf'})

TASK [repo : Disable selinux for repo server] ************************************************************************************************************************************************************
[WARNING]: SELinux state temporarily changed from 'enforcing' to 'permissive'. State change will take effect next reboot.
changed: [10.10.10.10]

TASK [repo : Launch repo nginx server] *******************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [repo : Waits repo server online] *******************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [repo : Download web url packages] ******************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=https://github.com/Vonng/pg_exporter/releases/download/v0.3.2/pg_exporter-0.3.2-1.el7.x86_64.rpm)
skipping: [10.10.10.10] => (item=https://github.com/cybertec-postgresql/vip-manager/releases/download/v0.6/vip-manager_0.6-1_amd64.rpm)
skipping: [10.10.10.10] => (item=http://guichaz.free.fr/polysh/files/polysh-0.4-1.noarch.rpm)

TASK [repo : Download repo packages] *********************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=epel-release nginx wget yum-utils yum createrepo)
skipping: [10.10.10.10] => (item=ntp chrony uuid lz4 nc pv jq vim-enhanced make patch bash lsof wget unzip git tuned)
skipping: [10.10.10.10] => (item=readline zlib openssl libyaml libxml2 libxslt perl-ExtUtils-Embed ca-certificates)
skipping: [10.10.10.10] => (item=numactl grubby sysstat dstat iotop bind-utils net-tools tcpdump socat ipvsadm telnet)
skipping: [10.10.10.10] => (item=grafana prometheus2 pushgateway alertmanager)
skipping: [10.10.10.10] => (item=node_exporter postgres_exporter nginx_exporter blackbox_exporter)
skipping: [10.10.10.10] => (item=consul consul_exporter consul-template etcd)
skipping: [10.10.10.10] => (item=ansible python python-pip python-psycopg2 audit)
skipping: [10.10.10.10] => (item=python3 python3-psycopg2 python36-requests python3-etcd python3-consul)
skipping: [10.10.10.10] => (item=python36-urllib3 python36-idna python36-pyOpenSSL python36-cryptography)
skipping: [10.10.10.10] => (item=haproxy keepalived dnsmasq)
skipping: [10.10.10.10] => (item=patroni patroni-consul patroni-etcd pgbouncer pg_cli pgbadger pg_activity)
skipping: [10.10.10.10] => (item=pgcenter boxinfo check_postgres emaj pgbconsole pg_bloat_check pgquarrel)
skipping: [10.10.10.10] => (item=barman barman-cli pgloader pgFormatter pitrery pspg pgxnclient PyGreSQL pgadmin4 tail_n_mail)
skipping: [10.10.10.10] => (item=postgresql13* postgis31* citus_13 timescaledb_13)
skipping: [10.10.10.10] => (item=pg_repack13 pg_squeeze13)
skipping: [10.10.10.10] => (item=pg_qualstats13 pg_stat_kcache13 system_stats_13 bgw_replstatus13)
skipping: [10.10.10.10] => (item=plr13 plsh13 plpgsql_check_13 plproxy13 plr13 plsh13 plpgsql_check_13 pldebugger13)
skipping: [10.10.10.10] => (item=hdfs_fdw_13 mongo_fdw13 mysql_fdw_13 ogr_fdw13 redis_fdw_13 pgbouncer_fdw13)
skipping: [10.10.10.10] => (item=wal2json13 count_distinct13 ddlx_13 geoip13 orafce13)
skipping: [10.10.10.10] => (item=rum_13 hypopg_13 ip4r13 jsquery_13 logerrors_13 periods_13 pg_auto_failover_13 pg_catcheck13)
skipping: [10.10.10.10] => (item=pg_fkpart13 pg_jobmon13 pg_partman13 pg_prioritize_13 pg_track_settings13 pgaudit15_13)
skipping: [10.10.10.10] => (item=pgcryptokey13 pgexportdoc13 pgimportdoc13 pgmemcache-13 pgmp13 pgq-13)
skipping: [10.10.10.10] => (item=pguint13 pguri13 prefix13  safeupdate_13 semver13  table_version13 tdigest13)

TASK [repo : Download repo pkg deps] *********************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=epel-release nginx wget yum-utils yum createrepo)
skipping: [10.10.10.10] => (item=ntp chrony uuid lz4 nc pv jq vim-enhanced make patch bash lsof wget unzip git tuned)
skipping: [10.10.10.10] => (item=readline zlib openssl libyaml libxml2 libxslt perl-ExtUtils-Embed ca-certificates)
skipping: [10.10.10.10] => (item=numactl grubby sysstat dstat iotop bind-utils net-tools tcpdump socat ipvsadm telnet)
skipping: [10.10.10.10] => (item=grafana prometheus2 pushgateway alertmanager)
skipping: [10.10.10.10] => (item=node_exporter postgres_exporter nginx_exporter blackbox_exporter)
skipping: [10.10.10.10] => (item=consul consul_exporter consul-template etcd)
skipping: [10.10.10.10] => (item=ansible python python-pip python-psycopg2 audit)
skipping: [10.10.10.10] => (item=python3 python3-psycopg2 python36-requests python3-etcd python3-consul)
skipping: [10.10.10.10] => (item=python36-urllib3 python36-idna python36-pyOpenSSL python36-cryptography)
skipping: [10.10.10.10] => (item=haproxy keepalived dnsmasq)
skipping: [10.10.10.10] => (item=patroni patroni-consul patroni-etcd pgbouncer pg_cli pgbadger pg_activity)
skipping: [10.10.10.10] => (item=pgcenter boxinfo check_postgres emaj pgbconsole pg_bloat_check pgquarrel)
skipping: [10.10.10.10] => (item=barman barman-cli pgloader pgFormatter pitrery pspg pgxnclient PyGreSQL pgadmin4 tail_n_mail)
skipping: [10.10.10.10] => (item=postgresql13* postgis31* citus_13 timescaledb_13)
skipping: [10.10.10.10] => (item=pg_repack13 pg_squeeze13)
skipping: [10.10.10.10] => (item=pg_qualstats13 pg_stat_kcache13 system_stats_13 bgw_replstatus13)
skipping: [10.10.10.10] => (item=plr13 plsh13 plpgsql_check_13 plproxy13 plr13 plsh13 plpgsql_check_13 pldebugger13)
skipping: [10.10.10.10] => (item=hdfs_fdw_13 mongo_fdw13 mysql_fdw_13 ogr_fdw13 redis_fdw_13 pgbouncer_fdw13)
skipping: [10.10.10.10] => (item=wal2json13 count_distinct13 ddlx_13 geoip13 orafce13)
skipping: [10.10.10.10] => (item=rum_13 hypopg_13 ip4r13 jsquery_13 logerrors_13 periods_13 pg_auto_failover_13 pg_catcheck13)
skipping: [10.10.10.10] => (item=pg_fkpart13 pg_jobmon13 pg_partman13 pg_prioritize_13 pg_track_settings13 pgaudit15_13)
skipping: [10.10.10.10] => (item=pgcryptokey13 pgexportdoc13 pgimportdoc13 pgmemcache-13 pgmp13 pgq-13)
skipping: [10.10.10.10] => (item=pguint13 pguri13 prefix13  safeupdate_13 semver13  table_version13 tdigest13)

TASK [repo : Create local repo index] ********************************************************************************************************************************************************************
skipping: [10.10.10.10]

TASK [repo : Copy bootstrap scripts] *********************************************************************************************************************************************************************
skipping: [10.10.10.10]

TASK [repo : Mark repo cache as valid] *******************************************************************************************************************************************************************
skipping: [10.10.10.10]

PLAY [Provision Node] ************************************************************************************************************************************************************************************

TASK [node : Update node hostname] ***********************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [node : Add new hostname to /etc/hosts] *************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [node : Write static dns records] *******************************************************************************************************************************************************************
changed: [10.10.10.10] => (item=10.10.10.10 yum.pigsty)
changed: [10.10.10.11] => (item=10.10.10.10 yum.pigsty)
changed: [10.10.10.13] => (item=10.10.10.10 yum.pigsty)
changed: [10.10.10.12] => (item=10.10.10.10 yum.pigsty)

TASK [node : Get old nameservers] ************************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [node : Truncate resolv file] ***********************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [node : Write resolv options] ***********************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=options single-request-reopen timeout:1 rotate)
changed: [10.10.10.12] => (item=options single-request-reopen timeout:1 rotate)
changed: [10.10.10.10] => (item=options single-request-reopen timeout:1 rotate)
changed: [10.10.10.13] => (item=options single-request-reopen timeout:1 rotate)
changed: [10.10.10.11] => (item=domain service.consul)
changed: [10.10.10.12] => (item=domain service.consul)
changed: [10.10.10.13] => (item=domain service.consul)
changed: [10.10.10.10] => (item=domain service.consul)

TASK [node : Add new nameservers] ************************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=10.10.10.10)
changed: [10.10.10.12] => (item=10.10.10.10)
changed: [10.10.10.10] => (item=10.10.10.10)
changed: [10.10.10.13] => (item=10.10.10.10)

TASK [node : Append old nameservers] *********************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=10.0.2.3)
changed: [10.10.10.12] => (item=10.0.2.3)
changed: [10.10.10.10] => (item=10.0.2.3)
changed: [10.10.10.13] => (item=10.0.2.3)

TASK [node : Node configure disable firewall] ************************************************************************************************************************************************************
ok: [10.10.10.11]
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [node : Node disable selinux by default] ************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
[WARNING]: SELinux state change will take effect next reboot
ok: [10.10.10.10]

TASK [node : Backup existing repos] **********************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [node : Install upstream repo] **********************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item={'name': 'base', 'description': 'CentOS-$releasever - Base - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/os/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.10] => (item={'name': 'updates', 'description': 'CentOS-$releasever - Updates - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/updates/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.11] => (item={'name': 'base', 'description': 'CentOS-$releasever - Base - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/os/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.10] => (item={'name': 'extras', 'description': 'CentOS-$releasever - Extras - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.11] => (item={'name': 'updates', 'description': 'CentOS-$releasever - Updates - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/updates/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.10] => (item={'name': 'epel', 'description': 'CentOS $releasever - EPEL - Aliyun Mirror', 'baseurl': 'http://mirrors.aliyun.com/epel/$releasever/$basearch', 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.12] => (item={'name': 'base', 'description': 'CentOS-$releasever - Base - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/os/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.11] => (item={'name': 'extras', 'description': 'CentOS-$releasever - Extras - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.10] => (item={'name': 'grafana', 'description': 'Grafana - TsingHua Mirror', 'gpgcheck': False, 'baseurl': 'https://mirrors.tuna.tsinghua.edu.cn/grafana/yum/rpm'})
skipping: [10.10.10.12] => (item={'name': 'updates', 'description': 'CentOS-$releasever - Updates - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/updates/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.11] => (item={'name': 'epel', 'description': 'CentOS $releasever - EPEL - Aliyun Mirror', 'baseurl': 'http://mirrors.aliyun.com/epel/$releasever/$basearch', 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.13] => (item={'name': 'base', 'description': 'CentOS-$releasever - Base - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/os/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.12] => (item={'name': 'extras', 'description': 'CentOS-$releasever - Extras - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.11] => (item={'name': 'grafana', 'description': 'Grafana - TsingHua Mirror', 'gpgcheck': False, 'baseurl': 'https://mirrors.tuna.tsinghua.edu.cn/grafana/yum/rpm'})
skipping: [10.10.10.13] => (item={'name': 'updates', 'description': 'CentOS-$releasever - Updates - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/updates/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.12] => (item={'name': 'epel', 'description': 'CentOS $releasever - EPEL - Aliyun Mirror', 'baseurl': 'http://mirrors.aliyun.com/epel/$releasever/$basearch', 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.13] => (item={'name': 'extras', 'description': 'CentOS-$releasever - Extras - Aliyun Mirror', 'baseurl': ['http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/', 'http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/', 'http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/'], 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.12] => (item={'name': 'grafana', 'description': 'Grafana - TsingHua Mirror', 'gpgcheck': False, 'baseurl': 'https://mirrors.tuna.tsinghua.edu.cn/grafana/yum/rpm'})
skipping: [10.10.10.13] => (item={'name': 'epel', 'description': 'CentOS $releasever - EPEL - Aliyun Mirror', 'baseurl': 'http://mirrors.aliyun.com/epel/$releasever/$basearch', 'gpgcheck': False, 'failovermethod': 'priority'})
skipping: [10.10.10.13] => (item={'name': 'grafana', 'description': 'Grafana - TsingHua Mirror', 'gpgcheck': False, 'baseurl': 'https://mirrors.tuna.tsinghua.edu.cn/grafana/yum/rpm'})
skipping: [10.10.10.10] => (item={'name': 'prometheus', 'description': 'Prometheus and exporters', 'gpgcheck': False, 'baseurl': 'https://packagecloud.io/prometheus-rpm/release/el/$releasever/$basearch'})
skipping: [10.10.10.10] => (item={'name': 'pgdg-common', 'description': 'PostgreSQL common RPMs for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.11] => (item={'name': 'prometheus', 'description': 'Prometheus and exporters', 'gpgcheck': False, 'baseurl': 'https://packagecloud.io/prometheus-rpm/release/el/$releasever/$basearch'})
skipping: [10.10.10.10] => (item={'name': 'pgdg13', 'description': 'PostgreSQL 13 for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/13/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.11] => (item={'name': 'pgdg-common', 'description': 'PostgreSQL common RPMs for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.12] => (item={'name': 'prometheus', 'description': 'Prometheus and exporters', 'gpgcheck': False, 'baseurl': 'https://packagecloud.io/prometheus-rpm/release/el/$releasever/$basearch'})
skipping: [10.10.10.10] => (item={'name': 'centos-sclo', 'description': 'CentOS-$releasever - SCLo', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-sclo'})
skipping: [10.10.10.11] => (item={'name': 'pgdg13', 'description': 'PostgreSQL 13 for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/13/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.12] => (item={'name': 'pgdg-common', 'description': 'PostgreSQL common RPMs for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.10] => (item={'name': 'centos-sclo-rh', 'description': 'CentOS-$releasever - SCLo rh', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-rh'})
skipping: [10.10.10.11] => (item={'name': 'centos-sclo', 'description': 'CentOS-$releasever - SCLo', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-sclo'})
skipping: [10.10.10.12] => (item={'name': 'pgdg13', 'description': 'PostgreSQL 13 for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/13/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.10] => (item={'name': 'nginx', 'description': 'Nginx Official Yum Repo', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'http://nginx.org/packages/centos/$releasever/$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'prometheus', 'description': 'Prometheus and exporters', 'gpgcheck': False, 'baseurl': 'https://packagecloud.io/prometheus-rpm/release/el/$releasever/$basearch'})
skipping: [10.10.10.11] => (item={'name': 'centos-sclo-rh', 'description': 'CentOS-$releasever - SCLo rh', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-rh'})
skipping: [10.10.10.12] => (item={'name': 'centos-sclo', 'description': 'CentOS-$releasever - SCLo', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-sclo'})
skipping: [10.10.10.13] => (item={'name': 'pgdg-common', 'description': 'PostgreSQL common RPMs for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.10] => (item={'name': 'haproxy', 'description': 'Copr repo for haproxy', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/roidelapluie/haproxy/epel-$releasever-$basearch/'})
skipping: [10.10.10.11] => (item={'name': 'nginx', 'description': 'Nginx Official Yum Repo', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'http://nginx.org/packages/centos/$releasever/$basearch/'})
skipping: [10.10.10.12] => (item={'name': 'centos-sclo-rh', 'description': 'CentOS-$releasever - SCLo rh', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-rh'})
skipping: [10.10.10.10] => (item={'name': 'harbottle', 'description': 'Copr repo for main owned by harbottle', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/harbottle/main/epel-$releasever-$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'pgdg13', 'description': 'PostgreSQL 13 for RHEL/CentOS $releasever - $basearch', 'gpgcheck': False, 'baseurl': 'http://mirrors.zju.edu.cn/postgresql/repos/yum/13/redhat/rhel-$releasever-$basearch'})
skipping: [10.10.10.11] => (item={'name': 'haproxy', 'description': 'Copr repo for haproxy', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/roidelapluie/haproxy/epel-$releasever-$basearch/'})
skipping: [10.10.10.12] => (item={'name': 'nginx', 'description': 'Nginx Official Yum Repo', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'http://nginx.org/packages/centos/$releasever/$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'centos-sclo', 'description': 'CentOS-$releasever - SCLo', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-sclo'})
skipping: [10.10.10.11] => (item={'name': 'harbottle', 'description': 'Copr repo for main owned by harbottle', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/harbottle/main/epel-$releasever-$basearch/'})
skipping: [10.10.10.12] => (item={'name': 'haproxy', 'description': 'Copr repo for haproxy', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/roidelapluie/haproxy/epel-$releasever-$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'centos-sclo-rh', 'description': 'CentOS-$releasever - SCLo rh', 'gpgcheck': False, 'mirrorlist': 'http://mirrorlist.centos.org?arch=$basearch&release=7&repo=sclo-rh'})
skipping: [10.10.10.12] => (item={'name': 'harbottle', 'description': 'Copr repo for main owned by harbottle', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/harbottle/main/epel-$releasever-$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'nginx', 'description': 'Nginx Official Yum Repo', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'http://nginx.org/packages/centos/$releasever/$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'haproxy', 'description': 'Copr repo for haproxy', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/roidelapluie/haproxy/epel-$releasever-$basearch/'})
skipping: [10.10.10.13] => (item={'name': 'harbottle', 'description': 'Copr repo for main owned by harbottle', 'skip_if_unavailable': True, 'gpgcheck': False, 'baseurl': 'https://download.copr.fedorainfracloud.org/results/harbottle/main/epel-$releasever-$basearch/'})

TASK [node : Install local repo] *************************************************************************************************************************************************************************
changed: [10.10.10.13] => (item=http://yum.pigsty/pigsty.repo)
changed: [10.10.10.12] => (item=http://yum.pigsty/pigsty.repo)
changed: [10.10.10.11] => (item=http://yum.pigsty/pigsty.repo)
changed: [10.10.10.10] => (item=http://yum.pigsty/pigsty.repo)

TASK [node : Install node basic packages] ****************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=[])
skipping: [10.10.10.11] => (item=[])
skipping: [10.10.10.12] => (item=[])
skipping: [10.10.10.13] => (item=[])

TASK [node : Install node extra packages] ****************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=[])
skipping: [10.10.10.11] => (item=[])
skipping: [10.10.10.12] => (item=[])
skipping: [10.10.10.13] => (item=[])

TASK [node : Install meta specific packages] *************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=[])
skipping: [10.10.10.11] => (item=[])
skipping: [10.10.10.12] => (item=[])
skipping: [10.10.10.13] => (item=[])

TASK [node : Install node basic packages] ****************************************************************************************************************************************************************
changed: [10.10.10.10] => (item=['wget,yum-utils,ntp,chrony,tuned,uuid,lz4,vim-minimal,make,patch,bash,lsof,wget,unzip,git,readline,zlib,openssl', 'numactl,grubby,sysstat,dstat,iotop,bind-utils,net-tools,tcpdump,socat,ipvsadm,telnet,tuned,pv,jq', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography', 'node_exporter,consul,consul-template,etcd,haproxy,keepalived,vip-manager'])
changed: [10.10.10.13] => (item=['wget,yum-utils,ntp,chrony,tuned,uuid,lz4,vim-minimal,make,patch,bash,lsof,wget,unzip,git,readline,zlib,openssl', 'numactl,grubby,sysstat,dstat,iotop,bind-utils,net-tools,tcpdump,socat,ipvsadm,telnet,tuned,pv,jq', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography', 'node_exporter,consul,consul-template,etcd,haproxy,keepalived,vip-manager'])
changed: [10.10.10.11] => (item=['wget,yum-utils,ntp,chrony,tuned,uuid,lz4,vim-minimal,make,patch,bash,lsof,wget,unzip,git,readline,zlib,openssl', 'numactl,grubby,sysstat,dstat,iotop,bind-utils,net-tools,tcpdump,socat,ipvsadm,telnet,tuned,pv,jq', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography', 'node_exporter,consul,consul-template,etcd,haproxy,keepalived,vip-manager'])
changed: [10.10.10.12] => (item=['wget,yum-utils,ntp,chrony,tuned,uuid,lz4,vim-minimal,make,patch,bash,lsof,wget,unzip,git,readline,zlib,openssl', 'numactl,grubby,sysstat,dstat,iotop,bind-utils,net-tools,tcpdump,socat,ipvsadm,telnet,tuned,pv,jq', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography', 'node_exporter,consul,consul-template,etcd,haproxy,keepalived,vip-manager'])

TASK [node : Install node extra packages] ****************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=['patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity'])
changed: [10.10.10.12] => (item=['patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity'])
changed: [10.10.10.13] => (item=['patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity'])
changed: [10.10.10.10] => (item=['patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity'])

TASK [node : Install meta specific packages] *************************************************************************************************************************************************************
skipping: [10.10.10.11] => (item=[])
skipping: [10.10.10.12] => (item=[])
skipping: [10.10.10.13] => (item=[])
changed: [10.10.10.10] => (item=['grafana,prometheus2,alertmanager,nginx_exporter,blackbox_exporter,pushgateway', 'dnsmasq,nginx,ansible,pgbadger,polysh'])

TASK [node : Node configure disable numa] ****************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [node : Node configure disable swap] ****************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [node : Node configure unmount swap] ****************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=swap)
skipping: [10.10.10.10] => (item=none)
skipping: [10.10.10.11] => (item=swap)
skipping: [10.10.10.11] => (item=none)
skipping: [10.10.10.12] => (item=swap)
skipping: [10.10.10.12] => (item=none)
skipping: [10.10.10.13] => (item=swap)
skipping: [10.10.10.13] => (item=none)

TASK [node : Node setup static network] ******************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Node configure disable firewall] ************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [node : Node configure disk prefetch] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [node : Enable linux kernel modules] ****************************************************************************************************************************************************************
changed: [10.10.10.13] => (item=softdog)
changed: [10.10.10.12] => (item=softdog)
changed: [10.10.10.11] => (item=softdog)
changed: [10.10.10.10] => (item=softdog)
changed: [10.10.10.13] => (item=br_netfilter)
changed: [10.10.10.12] => (item=br_netfilter)
changed: [10.10.10.11] => (item=br_netfilter)
changed: [10.10.10.10] => (item=br_netfilter)
changed: [10.10.10.12] => (item=ip_vs)
changed: [10.10.10.13] => (item=ip_vs)
changed: [10.10.10.11] => (item=ip_vs)
changed: [10.10.10.10] => (item=ip_vs)
changed: [10.10.10.13] => (item=ip_vs_rr)
changed: [10.10.10.12] => (item=ip_vs_rr)
changed: [10.10.10.11] => (item=ip_vs_rr)
changed: [10.10.10.10] => (item=ip_vs_rr)
ok: [10.10.10.13] => (item=ip_vs_rr)
ok: [10.10.10.12] => (item=ip_vs_rr)
ok: [10.10.10.11] => (item=ip_vs_rr)
ok: [10.10.10.10] => (item=ip_vs_rr)
changed: [10.10.10.13] => (item=ip_vs_wrr)
changed: [10.10.10.12] => (item=ip_vs_wrr)
changed: [10.10.10.11] => (item=ip_vs_wrr)
changed: [10.10.10.10] => (item=ip_vs_wrr)
changed: [10.10.10.13] => (item=ip_vs_sh)
changed: [10.10.10.12] => (item=ip_vs_sh)
changed: [10.10.10.11] => (item=ip_vs_sh)
changed: [10.10.10.10] => (item=ip_vs_sh)
changed: [10.10.10.13] => (item=nf_conntrack_ipv4)
changed: [10.10.10.12] => (item=nf_conntrack_ipv4)
changed: [10.10.10.11] => (item=nf_conntrack_ipv4)
changed: [10.10.10.10] => (item=nf_conntrack_ipv4)

TASK [node : Enable kernel module on reboot] *************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]
changed: [10.10.10.10]

TASK [node : Get config parameter page count] ************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [node : Get config parameter page size] *************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [node : Tune shmmax and shmall via mem] *************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [node : Create tuned profiles] **********************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=oltp)
changed: [10.10.10.12] => (item=oltp)
changed: [10.10.10.10] => (item=oltp)
changed: [10.10.10.13] => (item=oltp)
changed: [10.10.10.11] => (item=olap)
changed: [10.10.10.12] => (item=olap)
changed: [10.10.10.13] => (item=olap)
changed: [10.10.10.10] => (item=olap)
changed: [10.10.10.11] => (item=crit)
changed: [10.10.10.12] => (item=crit)
changed: [10.10.10.13] => (item=crit)
changed: [10.10.10.10] => (item=crit)
changed: [10.10.10.11] => (item=tiny)
changed: [10.10.10.12] => (item=tiny)
changed: [10.10.10.13] => (item=tiny)
changed: [10.10.10.10] => (item=tiny)

TASK [node : Render tuned profiles] **********************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=oltp)
changed: [10.10.10.12] => (item=oltp)
changed: [10.10.10.13] => (item=oltp)
changed: [10.10.10.10] => (item=oltp)
changed: [10.10.10.12] => (item=olap)
changed: [10.10.10.11] => (item=olap)
changed: [10.10.10.13] => (item=olap)
changed: [10.10.10.10] => (item=olap)
changed: [10.10.10.12] => (item=crit)
changed: [10.10.10.11] => (item=crit)
changed: [10.10.10.13] => (item=crit)
changed: [10.10.10.10] => (item=crit)
changed: [10.10.10.11] => (item=tiny)
changed: [10.10.10.12] => (item=tiny)
changed: [10.10.10.13] => (item=tiny)
changed: [10.10.10.10] => (item=tiny)

TASK [node : Active tuned profile] ***********************************************************************************************************************************************************************
changed: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]

TASK [node : Change additional sysctl params] ************************************************************************************************************************************************************
changed: [10.10.10.13] => (item={'key': 'net.bridge.bridge-nf-call-iptables', 'value': 1})
changed: [10.10.10.12] => (item={'key': 'net.bridge.bridge-nf-call-iptables', 'value': 1})
changed: [10.10.10.11] => (item={'key': 'net.bridge.bridge-nf-call-iptables', 'value': 1})
changed: [10.10.10.10] => (item={'key': 'net.bridge.bridge-nf-call-iptables', 'value': 1})

TASK [node : Copy default user bash profile] *************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Setup node default pam ulimits] *************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Create os user group admin] *****************************************************************************************************************************************************************
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Create os user admin] ***********************************************************************************************************************************************************************
changed: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]

TASK [node : Grant admin group nopass sudo] **************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Add no host checking to ssh config] *********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Add admin ssh no host checking] *************************************************************************************************************************************************************
ok: [10.10.10.11]
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [node : Fetch all admin public keys] ****************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [node : Exchange all admin ssh keys] ****************************************************************************************************************************************************************
changed: [10.10.10.10 -> meta] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDfXbkp7ATV3rIzcpCwxcwpumIjnjldzDp9qfu65d4W5gSNumN/wvOORnG17rB2y/msyjstu1C42v2V60yho/XjPNIqqPWPtM/bc6MHNeNJJxvEEtDsY530z3n37QTcVI1kg3zRqnzm8HDKEE+BAll+iyXjzTFoGHc39syDRF8r5sZpG0qiNY2QaqEnByASsoHM4RQ3Jw2D2SbA78wFBz1zqsdz5VympAcc9wcfuUqhwk0ExL+AtrPNUeyEXwgRr1Br6JXVHjT6EHLsZburTD7uT94Jqzixd3LXRwsmuCrPIssASrYvfnWVQ29MxhiZqrmLcwp4ImjQetcZE2EgfzEp ansible-generated on meta', '10.10.10.10'])
changed: [10.10.10.13 -> meta] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDbkD6WQhs9KAv9HTYtZ+q2Nfxqhj72YbP16m0mTrEOS2evd4MWDBhVgAE6qK4gvAhVBdEdNaHc3f2W/wDpKvvbvCbwy+HZldUCTVUe1W3sycm1ZwP7m9Xr7Rg0Dd1Nom87CWsqmlmN6afPYyvJV3wCl4ZuqrAMQ5oCrR4D1B8yZBL7rj55JpzggnNJYv7+ueIeUYoPzE6mu32k9wPxEa2qXcdVelgL7dwjTAt1nsNukWAufuAI1nZcJahsNjj1B2XEEwgA1mHUzDPpemn5alCNeCb+Hdb0Y12No/Wo2Gcn3b5vh9pOamLCm3CGrrsAXZ2B8tQPGFObhGkSOB6pddkT ansible-generated on node-3', '10.10.10.10'])
changed: [10.10.10.12 -> meta] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC3IAopnkVwQ779/Hk5MceAVZbhb/y3YaUu7ZROI87TaY/XK5WKJjplfNlLBC2vXGNkYMirbW+Qmmz/XIsyL7qvKmQfcMGP3ILD4FtMMlJMWLwBTIw5ORxvoZGxaWfw0bcZSIw5rv9rBA4UJR9JfZhpUkBMj7cq8jNDyIrLpoJ+hlnJa5G5zyiMWBqe7VKOoiBo7d2WBIauhRgHY3G79H9pVxJti6JJOeQ1tsUI5UtOMCRO+dbmsuRWruac4jWOj864RG/EjFveWEfCTagMFakqaxPTgF3RHAwPVBjbMm3+2lBiVNd2Zt2g/2gPdkEbIE+xXXP/f5kh21gXFea4ENsV ansible-generated on node-2', '10.10.10.10'])
changed: [10.10.10.11 -> meta] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2TJItJzBUEZ452k7ADL6mIQsGk7gb4AUqvN0pAHwR06pVv1XUmpCI5Wb0RUOoNFwmSBVTUXoXCnK7SB44ftpzD29cpxw3tlLEphYeY1wfrd2lblhpn2KxzBhyJZ27lK2qcZk7Ik20pZDhQZRuZuhb6HufYn7FGOutB8kgQChrcpqr9zRhjZOe4Y8tLR2lmEAVrp6ZsS04rjiBJ65TDCWCNSnin8DVbM1EerJ6Pvxy1cOY+B00EYMHlMni/3orzcrlnZqpkR/NRpgs9+lo+DZ4SCuEtIEOzpPzcm/O4oLhxSnTMJKTFwcc+bgmE0t1LMxvIKOQTwhIX+KoBE/syxh9 ansible-generated on node-1', '10.10.10.10'])
changed: [10.10.10.10 -> node-1] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDfXbkp7ATV3rIzcpCwxcwpumIjnjldzDp9qfu65d4W5gSNumN/wvOORnG17rB2y/msyjstu1C42v2V60yho/XjPNIqqPWPtM/bc6MHNeNJJxvEEtDsY530z3n37QTcVI1kg3zRqnzm8HDKEE+BAll+iyXjzTFoGHc39syDRF8r5sZpG0qiNY2QaqEnByASsoHM4RQ3Jw2D2SbA78wFBz1zqsdz5VympAcc9wcfuUqhwk0ExL+AtrPNUeyEXwgRr1Br6JXVHjT6EHLsZburTD7uT94Jqzixd3LXRwsmuCrPIssASrYvfnWVQ29MxhiZqrmLcwp4ImjQetcZE2EgfzEp ansible-generated on meta', '10.10.10.11'])
changed: [10.10.10.12 -> node-1] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC3IAopnkVwQ779/Hk5MceAVZbhb/y3YaUu7ZROI87TaY/XK5WKJjplfNlLBC2vXGNkYMirbW+Qmmz/XIsyL7qvKmQfcMGP3ILD4FtMMlJMWLwBTIw5ORxvoZGxaWfw0bcZSIw5rv9rBA4UJR9JfZhpUkBMj7cq8jNDyIrLpoJ+hlnJa5G5zyiMWBqe7VKOoiBo7d2WBIauhRgHY3G79H9pVxJti6JJOeQ1tsUI5UtOMCRO+dbmsuRWruac4jWOj864RG/EjFveWEfCTagMFakqaxPTgF3RHAwPVBjbMm3+2lBiVNd2Zt2g/2gPdkEbIE+xXXP/f5kh21gXFea4ENsV ansible-generated on node-2', '10.10.10.11'])
changed: [10.10.10.13 -> node-1] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDbkD6WQhs9KAv9HTYtZ+q2Nfxqhj72YbP16m0mTrEOS2evd4MWDBhVgAE6qK4gvAhVBdEdNaHc3f2W/wDpKvvbvCbwy+HZldUCTVUe1W3sycm1ZwP7m9Xr7Rg0Dd1Nom87CWsqmlmN6afPYyvJV3wCl4ZuqrAMQ5oCrR4D1B8yZBL7rj55JpzggnNJYv7+ueIeUYoPzE6mu32k9wPxEa2qXcdVelgL7dwjTAt1nsNukWAufuAI1nZcJahsNjj1B2XEEwgA1mHUzDPpemn5alCNeCb+Hdb0Y12No/Wo2Gcn3b5vh9pOamLCm3CGrrsAXZ2B8tQPGFObhGkSOB6pddkT ansible-generated on node-3', '10.10.10.11'])
changed: [10.10.10.11 -> node-1] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2TJItJzBUEZ452k7ADL6mIQsGk7gb4AUqvN0pAHwR06pVv1XUmpCI5Wb0RUOoNFwmSBVTUXoXCnK7SB44ftpzD29cpxw3tlLEphYeY1wfrd2lblhpn2KxzBhyJZ27lK2qcZk7Ik20pZDhQZRuZuhb6HufYn7FGOutB8kgQChrcpqr9zRhjZOe4Y8tLR2lmEAVrp6ZsS04rjiBJ65TDCWCNSnin8DVbM1EerJ6Pvxy1cOY+B00EYMHlMni/3orzcrlnZqpkR/NRpgs9+lo+DZ4SCuEtIEOzpPzcm/O4oLhxSnTMJKTFwcc+bgmE0t1LMxvIKOQTwhIX+KoBE/syxh9 ansible-generated on node-1', '10.10.10.11'])
changed: [10.10.10.10 -> node-2] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDfXbkp7ATV3rIzcpCwxcwpumIjnjldzDp9qfu65d4W5gSNumN/wvOORnG17rB2y/msyjstu1C42v2V60yho/XjPNIqqPWPtM/bc6MHNeNJJxvEEtDsY530z3n37QTcVI1kg3zRqnzm8HDKEE+BAll+iyXjzTFoGHc39syDRF8r5sZpG0qiNY2QaqEnByASsoHM4RQ3Jw2D2SbA78wFBz1zqsdz5VympAcc9wcfuUqhwk0ExL+AtrPNUeyEXwgRr1Br6JXVHjT6EHLsZburTD7uT94Jqzixd3LXRwsmuCrPIssASrYvfnWVQ29MxhiZqrmLcwp4ImjQetcZE2EgfzEp ansible-generated on meta', '10.10.10.12'])
changed: [10.10.10.13 -> node-2] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDbkD6WQhs9KAv9HTYtZ+q2Nfxqhj72YbP16m0mTrEOS2evd4MWDBhVgAE6qK4gvAhVBdEdNaHc3f2W/wDpKvvbvCbwy+HZldUCTVUe1W3sycm1ZwP7m9Xr7Rg0Dd1Nom87CWsqmlmN6afPYyvJV3wCl4ZuqrAMQ5oCrR4D1B8yZBL7rj55JpzggnNJYv7+ueIeUYoPzE6mu32k9wPxEa2qXcdVelgL7dwjTAt1nsNukWAufuAI1nZcJahsNjj1B2XEEwgA1mHUzDPpemn5alCNeCb+Hdb0Y12No/Wo2Gcn3b5vh9pOamLCm3CGrrsAXZ2B8tQPGFObhGkSOB6pddkT ansible-generated on node-3', '10.10.10.12'])
changed: [10.10.10.12 -> node-2] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC3IAopnkVwQ779/Hk5MceAVZbhb/y3YaUu7ZROI87TaY/XK5WKJjplfNlLBC2vXGNkYMirbW+Qmmz/XIsyL7qvKmQfcMGP3ILD4FtMMlJMWLwBTIw5ORxvoZGxaWfw0bcZSIw5rv9rBA4UJR9JfZhpUkBMj7cq8jNDyIrLpoJ+hlnJa5G5zyiMWBqe7VKOoiBo7d2WBIauhRgHY3G79H9pVxJti6JJOeQ1tsUI5UtOMCRO+dbmsuRWruac4jWOj864RG/EjFveWEfCTagMFakqaxPTgF3RHAwPVBjbMm3+2lBiVNd2Zt2g/2gPdkEbIE+xXXP/f5kh21gXFea4ENsV ansible-generated on node-2', '10.10.10.12'])
changed: [10.10.10.11 -> node-2] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2TJItJzBUEZ452k7ADL6mIQsGk7gb4AUqvN0pAHwR06pVv1XUmpCI5Wb0RUOoNFwmSBVTUXoXCnK7SB44ftpzD29cpxw3tlLEphYeY1wfrd2lblhpn2KxzBhyJZ27lK2qcZk7Ik20pZDhQZRuZuhb6HufYn7FGOutB8kgQChrcpqr9zRhjZOe4Y8tLR2lmEAVrp6ZsS04rjiBJ65TDCWCNSnin8DVbM1EerJ6Pvxy1cOY+B00EYMHlMni/3orzcrlnZqpkR/NRpgs9+lo+DZ4SCuEtIEOzpPzcm/O4oLhxSnTMJKTFwcc+bgmE0t1LMxvIKOQTwhIX+KoBE/syxh9 ansible-generated on node-1', '10.10.10.12'])
changed: [10.10.10.10 -> node-3] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDfXbkp7ATV3rIzcpCwxcwpumIjnjldzDp9qfu65d4W5gSNumN/wvOORnG17rB2y/msyjstu1C42v2V60yho/XjPNIqqPWPtM/bc6MHNeNJJxvEEtDsY530z3n37QTcVI1kg3zRqnzm8HDKEE+BAll+iyXjzTFoGHc39syDRF8r5sZpG0qiNY2QaqEnByASsoHM4RQ3Jw2D2SbA78wFBz1zqsdz5VympAcc9wcfuUqhwk0ExL+AtrPNUeyEXwgRr1Br6JXVHjT6EHLsZburTD7uT94Jqzixd3LXRwsmuCrPIssASrYvfnWVQ29MxhiZqrmLcwp4ImjQetcZE2EgfzEp ansible-generated on meta', '10.10.10.13'])
changed: [10.10.10.13 -> node-3] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDbkD6WQhs9KAv9HTYtZ+q2Nfxqhj72YbP16m0mTrEOS2evd4MWDBhVgAE6qK4gvAhVBdEdNaHc3f2W/wDpKvvbvCbwy+HZldUCTVUe1W3sycm1ZwP7m9Xr7Rg0Dd1Nom87CWsqmlmN6afPYyvJV3wCl4ZuqrAMQ5oCrR4D1B8yZBL7rj55JpzggnNJYv7+ueIeUYoPzE6mu32k9wPxEa2qXcdVelgL7dwjTAt1nsNukWAufuAI1nZcJahsNjj1B2XEEwgA1mHUzDPpemn5alCNeCb+Hdb0Y12No/Wo2Gcn3b5vh9pOamLCm3CGrrsAXZ2B8tQPGFObhGkSOB6pddkT ansible-generated on node-3', '10.10.10.13'])
changed: [10.10.10.11 -> node-3] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2TJItJzBUEZ452k7ADL6mIQsGk7gb4AUqvN0pAHwR06pVv1XUmpCI5Wb0RUOoNFwmSBVTUXoXCnK7SB44ftpzD29cpxw3tlLEphYeY1wfrd2lblhpn2KxzBhyJZ27lK2qcZk7Ik20pZDhQZRuZuhb6HufYn7FGOutB8kgQChrcpqr9zRhjZOe4Y8tLR2lmEAVrp6ZsS04rjiBJ65TDCWCNSnin8DVbM1EerJ6Pvxy1cOY+B00EYMHlMni/3orzcrlnZqpkR/NRpgs9+lo+DZ4SCuEtIEOzpPzcm/O4oLhxSnTMJKTFwcc+bgmE0t1LMxvIKOQTwhIX+KoBE/syxh9 ansible-generated on node-1', '10.10.10.13'])
changed: [10.10.10.12 -> node-3] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC3IAopnkVwQ779/Hk5MceAVZbhb/y3YaUu7ZROI87TaY/XK5WKJjplfNlLBC2vXGNkYMirbW+Qmmz/XIsyL7qvKmQfcMGP3ILD4FtMMlJMWLwBTIw5ORxvoZGxaWfw0bcZSIw5rv9rBA4UJR9JfZhpUkBMj7cq8jNDyIrLpoJ+hlnJa5G5zyiMWBqe7VKOoiBo7d2WBIauhRgHY3G79H9pVxJti6JJOeQ1tsUI5UtOMCRO+dbmsuRWruac4jWOj864RG/EjFveWEfCTagMFakqaxPTgF3RHAwPVBjbMm3+2lBiVNd2Zt2g/2gPdkEbIE+xXXP/f5kh21gXFea4ENsV ansible-generated on node-2', '10.10.10.13'])

TASK [node : Install public keys] ************************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQC7IMAMNavYtWwzAJajKqwdn3ar5BhvcwCnBTxxEkXhGlCO2vfgosSAQMEflfgvkiI5nM1HIFQ8KINlx1XLO7SdL5KdInG5LIJjAFh0pujS4kNCT9a5IGvSq1BrzGqhbEcwWYdju1ZPYBcJm/MG+JD0dYCh8vfrYB/cYMD0SOmNkQ== vagrant@pigsty.com)
changed: [10.10.10.10] => (item=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQC7IMAMNavYtWwzAJajKqwdn3ar5BhvcwCnBTxxEkXhGlCO2vfgosSAQMEflfgvkiI5nM1HIFQ8KINlx1XLO7SdL5KdInG5LIJjAFh0pujS4kNCT9a5IGvSq1BrzGqhbEcwWYdju1ZPYBcJm/MG+JD0dYCh8vfrYB/cYMD0SOmNkQ== vagrant@pigsty.com)
changed: [10.10.10.12] => (item=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQC7IMAMNavYtWwzAJajKqwdn3ar5BhvcwCnBTxxEkXhGlCO2vfgosSAQMEflfgvkiI5nM1HIFQ8KINlx1XLO7SdL5KdInG5LIJjAFh0pujS4kNCT9a5IGvSq1BrzGqhbEcwWYdju1ZPYBcJm/MG+JD0dYCh8vfrYB/cYMD0SOmNkQ== vagrant@pigsty.com)
changed: [10.10.10.13] => (item=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQC7IMAMNavYtWwzAJajKqwdn3ar5BhvcwCnBTxxEkXhGlCO2vfgosSAQMEflfgvkiI5nM1HIFQ8KINlx1XLO7SdL5KdInG5LIJjAFh0pujS4kNCT9a5IGvSq1BrzGqhbEcwWYdju1ZPYBcJm/MG+JD0dYCh8vfrYB/cYMD0SOmNkQ== vagrant@pigsty.com)

TASK [node : Install ntp package] ************************************************************************************************************************************************************************
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.10]
ok: [10.10.10.13]

TASK [node : Install chrony package] *********************************************************************************************************************************************************************
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]
ok: [10.10.10.10]

TASK [node : Setup default node timezone] ****************************************************************************************************************************************************************
changed: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]

TASK [node : Copy the ntp.conf file] *********************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Copy the chrony.conf template] **************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [node : Launch ntpd service] ************************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [node : Launch chronyd service] *********************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

PLAY [Init meta service] *********************************************************************************************************************************************************************************

TASK [ca : Create local ca directory] ********************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [ca : Copy ca cert from local files] ****************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=ca.key)
skipping: [10.10.10.10] => (item=ca.crt)

TASK [ca : Check ca key cert exists] *********************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [ca : Create self-signed CA key-cert] ***************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nameserver : Make sure dnsmasq package installed] **************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nameserver : Copy dnsmasq /etc/dnsmasq.d/config] ***************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nameserver : Add dynamic dns records to meta] ******************************************************************************************************************************************************
changed: [10.10.10.10] => (item=10.10.10.2  pg-meta)
changed: [10.10.10.10] => (item=10.10.10.3  pg-test)
changed: [10.10.10.10] => (item=10.10.10.10 meta-1)
changed: [10.10.10.10] => (item=10.10.10.11 node-1)
changed: [10.10.10.10] => (item=10.10.10.12 node-2)
changed: [10.10.10.10] => (item=10.10.10.13 node-3)
changed: [10.10.10.10] => (item=10.10.10.10 pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 y.pigsty yum.pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 c.pigsty consul.pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 g.pigsty grafana.pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 p.pigsty prometheus.pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 a.pigsty alertmanager.pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 n.pigsty ntp.pigsty)
changed: [10.10.10.10] => (item=10.10.10.10 h.pigsty haproxy.pigsty)

TASK [nameserver : Launch meta dnsmasq service] **********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nameserver : Wait for meta dnsmasq online] *********************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nameserver : Register consul dnsmasq service] ******************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nameserver : Reload consul] ************************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Make sure nginx installed] *****************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nginx : Create local html directory] ***************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nginx : Create nginx config directory] *************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Update default nginx index page] ***********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Copy nginx default config] *****************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nginx : Copy nginx upstream conf] ******************************************************************************************************************************************************************
changed: [10.10.10.10] => (item={'name': 'home', 'host': 'pigsty', 'url': '127.0.0.1:3000'})
changed: [10.10.10.10] => (item={'name': 'consul', 'host': 'c.pigsty', 'url': '127.0.0.1:8500'})
changed: [10.10.10.10] => (item={'name': 'grafana', 'host': 'g.pigsty', 'url': '127.0.0.1:3000'})
changed: [10.10.10.10] => (item={'name': 'prometheus', 'host': 'p.pigsty', 'url': '127.0.0.1:9090'})
changed: [10.10.10.10] => (item={'name': 'alertmanager', 'host': 'a.pigsty', 'url': '127.0.0.1:9093'})
changed: [10.10.10.10] => (item={'name': 'haproxy', 'host': 'h.pigsty', 'url': '127.0.0.1:9091'})

TASK [nginx : Templating /etc/nginx/haproxy.conf] ********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Render haproxy upstream in cluster mode] ***************************************************************************************************************************************************
changed: [10.10.10.10] => (item=pg-meta)
changed: [10.10.10.10] => (item=pg-test)

TASK [nginx : Render haproxy location in cluster mode] ***************************************************************************************************************************************************
changed: [10.10.10.10] => (item=pg-meta)
changed: [10.10.10.10] => (item=pg-test)

TASK [nginx : Templating haproxy cluster index] **********************************************************************************************************************************************************
changed: [10.10.10.10] => (item=pg-meta)
changed: [10.10.10.10] => (item=pg-test)

TASK [nginx : Templating haproxy cluster index] **********************************************************************************************************************************************************
changed: [10.10.10.10] => (item=pg-meta)
ok: [10.10.10.10] => (item=pg-test)

TASK [nginx : Restart meta nginx service] ****************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Wait for nginx service online] *************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nginx : Make sure nginx exporter installed] ********************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nginx : Config nginx_exporter options] *************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Restart nginx_exporter service] ************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Wait for nginx exporter online] ************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [nginx : Register cosnul nginx service] *************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Register consul nginx-exporter service] ****************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [nginx : Reload consul] *****************************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Install prometheus and alertmanager] **************************************************************************************************************************************************
ok: [10.10.10.10] => (item=prometheus2)
ok: [10.10.10.10] => (item=alertmanager)

TASK [prometheus : Wipe out prometheus config dir] *******************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Wipe out existing prometheus data] ****************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [prometheus : Create postgres directory structure] **************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/etc/prometheus)
changed: [10.10.10.10] => (item=/etc/prometheus/bin)
changed: [10.10.10.10] => (item=/etc/prometheus/rules)
changed: [10.10.10.10] => (item=/etc/prometheus/targets)
changed: [10.10.10.10] => (item=/export/prometheus/data)

TASK [prometheus : Copy prometheus bin scripts] **********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Copy prometheus rules scripts] ********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Copy altermanager config] *************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Render prometheus config] *************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Config /etc/prometheus opts] **********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Launch prometheus service] ************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Launch alertmanager service] **********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Wait for prometheus online] ***********************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [prometheus : Wait for alertmanager online] *********************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [prometheus : Render prometheus targets in cluster mode] ********************************************************************************************************************************************
changed: [10.10.10.10] => (item=pg-meta)
changed: [10.10.10.10] => (item=pg-test)

TASK [prometheus : Reload prometheus service] ************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Copy prometheus service definition] ***************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Copy alertmanager service definition] *************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [prometheus : Reload consul to register prometheus] *************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Make sure grafana is installed] **********************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [grafana : Check grafana plugin cache exists] *******************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [grafana : Provision grafana plugins via cache] *****************************************************************************************************************************************************
[WARNING]: Consider using the file module with state=absent rather than running 'rm'.  If you need to use command because file is insufficient you can add 'warn: false' to this command task or set
'command_warnings=False' in ansible.cfg to get rid of this message.
changed: [10.10.10.10]

TASK [grafana : Download grafana plugins from web] *******************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=redis-datasource)
skipping: [10.10.10.10] => (item=simpod-json-datasource)
skipping: [10.10.10.10] => (item=fifemon-graphql-datasource)
skipping: [10.10.10.10] => (item=sbueringer-consul-datasource)
skipping: [10.10.10.10] => (item=camptocamp-prometheus-alertmanager-datasource)
skipping: [10.10.10.10] => (item=ryantxu-ajax-panel)
skipping: [10.10.10.10] => (item=marcusolsson-hourly-heatmap-panel)
skipping: [10.10.10.10] => (item=michaeldmoore-multistat-panel)
skipping: [10.10.10.10] => (item=marcusolsson-treemap-panel)
skipping: [10.10.10.10] => (item=pr0ps-trackmap-panel)
skipping: [10.10.10.10] => (item=dalvany-image-panel)
skipping: [10.10.10.10] => (item=magnesium-wordcloud-panel)
skipping: [10.10.10.10] => (item=cloudspout-button-panel)
skipping: [10.10.10.10] => (item=speakyourcode-button-panel)
skipping: [10.10.10.10] => (item=jdbranham-diagram-panel)
skipping: [10.10.10.10] => (item=grafana-piechart-panel)
skipping: [10.10.10.10] => (item=snuids-radar-panel)
skipping: [10.10.10.10] => (item=digrich-bubblechart-panel)

TASK [grafana : Download grafana plugins from web] *******************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=https://github.com/Vonng/grafana-echarts)

TASK [grafana : Create grafana plugins cache] ************************************************************************************************************************************************************
skipping: [10.10.10.10]

TASK [grafana : Copy /etc/grafana/grafana.ini] ***********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Remove grafana provision dir] ************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Copy provisioning content] ***************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Copy pigsty dashboards] ******************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Copy pigsty icon image] ******************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Replace grafana icon with pigsty] ********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Launch grafana service] ******************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Wait for grafana online] *****************************************************************************************************************************************************************
ok: [10.10.10.10]

TASK [grafana : Update grafana default preferences] ******************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Register consul grafana service] *********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [grafana : Reload consul] ***************************************************************************************************************************************************************************
changed: [10.10.10.10]

PLAY [Init dcs] ******************************************************************************************************************************************************************************************

TASK [consul : Check for existing consul] ****************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [consul : Consul exists flag fact set] **************************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [consul : Abort due to consul exists] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Clean existing consul instance] ***********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Stop any running consul instance] *********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [consul : Remove existing consul dir] ***************************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/etc/consul.d)
changed: [10.10.10.11] => (item=/etc/consul.d)
changed: [10.10.10.12] => (item=/etc/consul.d)
changed: [10.10.10.13] => (item=/etc/consul.d)
changed: [10.10.10.10] => (item=/var/lib/consul)
changed: [10.10.10.11] => (item=/var/lib/consul)
changed: [10.10.10.12] => (item=/var/lib/consul)
changed: [10.10.10.13] => (item=/var/lib/consul)

TASK [consul : Recreate consul dir] **********************************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/etc/consul.d)
changed: [10.10.10.11] => (item=/etc/consul.d)
changed: [10.10.10.12] => (item=/etc/consul.d)
changed: [10.10.10.13] => (item=/etc/consul.d)
changed: [10.10.10.10] => (item=/var/lib/consul)
changed: [10.10.10.11] => (item=/var/lib/consul)
changed: [10.10.10.13] => (item=/var/lib/consul)
changed: [10.10.10.12] => (item=/var/lib/consul)

TASK [consul : Make sure consul is installed] ************************************************************************************************************************************************************
ok: [10.10.10.11]
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [consul : Make sure consul dir exists] **************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [consul : Get dcs server node names] ****************************************************************************************************************************************************************
ok: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Get dcs node name from var] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Get dcs node name from var] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [consul : Fetch hostname as dcs node name] **********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Get dcs name from hostname] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Copy /etc/consul.d/consul.json] ***********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [consul : Copy consul agent service] ****************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [consul : Get dcs bootstrap expect quroum] **********************************************************************************************************************************************************
ok: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Copy consul server service unit] **********************************************************************************************************************************************************
changed: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Launch consul server service] *************************************************************************************************************************************************************
changed: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Wait for consul server online] ************************************************************************************************************************************************************
ok: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [consul : Launch consul agent service] **************************************************************************************************************************************************************
skipping: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [consul : Wait for consul agent online] *************************************************************************************************************************************************************
skipping: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

PLAY [Init database cluster] *****************************************************************************************************************************************************************************

TASK [postgres : Create os group postgres] ***************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Make sure dcs group exists] *************************************************************************************************************************************************************
ok: [10.10.10.10] => (item=consul)
ok: [10.10.10.11] => (item=consul)
ok: [10.10.10.12] => (item=consul)
ok: [10.10.10.13] => (item=consul)
ok: [10.10.10.11] => (item=etcd)
ok: [10.10.10.10] => (item=etcd)
ok: [10.10.10.12] => (item=etcd)
ok: [10.10.10.13] => (item=etcd)

TASK [postgres : Create dbsu postgres] *******************************************************************************************************************************************************************
changed: [10.10.10.13]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Grant dbsu nopass sudo] *****************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Grant dbsu all sudo] ********************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Grant dbsu limited sudo] ****************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Config patroni watchdog support] ********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Add dbsu ssh no host checking] **********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Fetch dbsu public keys] *****************************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Exchange dbsu ssh keys] *****************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC8ahlH3Yo0nTb1hhd7SGTF1sCwnjEVA/yGra2ktQcZ/i8S/2tfumVomxtnNTeOZqNeQygVUbRgIH77lABXrXwBOimw+J0EmoekPsW7q/NCT5EJgqfoDe5vWBpyhrCe1ixCxESlP2GfpaJYGqeMW2G8HiFU6ieDZcfGcFn1q9JBjtrrV851Htw+Ik/fed93ipGgWzzZnu4NOjz7tpmrsmE3/1J/RvPQdRT7Pjuy2pLn+oCjMkQHJezvUKruVTVwxjObaWO7WFlvQCy2dRez1GBxEK80LRbsZfmgkfIQPzmqHOaacqNBAHe+OeYlBh3fMMbpALzJHnhgJSW5GpdRwiUJ ansible-generated on meta', '10.10.10.10'])
skipping: [10.10.10.10] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC8ahlH3Yo0nTb1hhd7SGTF1sCwnjEVA/yGra2ktQcZ/i8S/2tfumVomxtnNTeOZqNeQygVUbRgIH77lABXrXwBOimw+J0EmoekPsW7q/NCT5EJgqfoDe5vWBpyhrCe1ixCxESlP2GfpaJYGqeMW2G8HiFU6ieDZcfGcFn1q9JBjtrrV851Htw+Ik/fed93ipGgWzzZnu4NOjz7tpmrsmE3/1J/RvPQdRT7Pjuy2pLn+oCjMkQHJezvUKruVTVwxjObaWO7WFlvQCy2dRez1GBxEK80LRbsZfmgkfIQPzmqHOaacqNBAHe+OeYlBh3fMMbpALzJHnhgJSW5GpdRwiUJ ansible-generated on meta', '10.10.10.11'])
skipping: [10.10.10.10] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC8ahlH3Yo0nTb1hhd7SGTF1sCwnjEVA/yGra2ktQcZ/i8S/2tfumVomxtnNTeOZqNeQygVUbRgIH77lABXrXwBOimw+J0EmoekPsW7q/NCT5EJgqfoDe5vWBpyhrCe1ixCxESlP2GfpaJYGqeMW2G8HiFU6ieDZcfGcFn1q9JBjtrrV851Htw+Ik/fed93ipGgWzzZnu4NOjz7tpmrsmE3/1J/RvPQdRT7Pjuy2pLn+oCjMkQHJezvUKruVTVwxjObaWO7WFlvQCy2dRez1GBxEK80LRbsZfmgkfIQPzmqHOaacqNBAHe+OeYlBh3fMMbpALzJHnhgJSW5GpdRwiUJ ansible-generated on meta', '10.10.10.12'])
skipping: [10.10.10.10] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC8ahlH3Yo0nTb1hhd7SGTF1sCwnjEVA/yGra2ktQcZ/i8S/2tfumVomxtnNTeOZqNeQygVUbRgIH77lABXrXwBOimw+J0EmoekPsW7q/NCT5EJgqfoDe5vWBpyhrCe1ixCxESlP2GfpaJYGqeMW2G8HiFU6ieDZcfGcFn1q9JBjtrrV851Htw+Ik/fed93ipGgWzzZnu4NOjz7tpmrsmE3/1J/RvPQdRT7Pjuy2pLn+oCjMkQHJezvUKruVTVwxjObaWO7WFlvQCy2dRez1GBxEK80LRbsZfmgkfIQPzmqHOaacqNBAHe+OeYlBh3fMMbpALzJHnhgJSW5GpdRwiUJ ansible-generated on meta', '10.10.10.13'])
skipping: [10.10.10.11] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDCIr/IW4qyd4Ls8dztCJyYHt354iPFbhLAUUiEK9R3A5W8UOSiJK/WVwlxMazH8QUaMWHuQAlTtW66kW1DDU+fsJ4xGxrNjEnwUbmWfj3BBnoANJQHYOid8iLJwWZuykvz0EIdGMDVpUpIx/qqm3/ZlC+cD0iukXQyEyAw3Qgts/Twqr5IJGeQOFy9Z4rmqSXtz/8tS0YOHCHVC5GGsUpD5+GLqhwPd64xCbWnvpYY61IX45Hzf+zO80xGqPeQLqF9HULs5wi2i6plKrSRl76VWCq9T7QMQMKJJSLUabnrXrKm+sr21LImgpSxSbqbBVVNUVS+adQvvylWb6yaFWov ansible-generated on node-1', '10.10.10.10'])
skipping: [10.10.10.11] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDCIr/IW4qyd4Ls8dztCJyYHt354iPFbhLAUUiEK9R3A5W8UOSiJK/WVwlxMazH8QUaMWHuQAlTtW66kW1DDU+fsJ4xGxrNjEnwUbmWfj3BBnoANJQHYOid8iLJwWZuykvz0EIdGMDVpUpIx/qqm3/ZlC+cD0iukXQyEyAw3Qgts/Twqr5IJGeQOFy9Z4rmqSXtz/8tS0YOHCHVC5GGsUpD5+GLqhwPd64xCbWnvpYY61IX45Hzf+zO80xGqPeQLqF9HULs5wi2i6plKrSRl76VWCq9T7QMQMKJJSLUabnrXrKm+sr21LImgpSxSbqbBVVNUVS+adQvvylWb6yaFWov ansible-generated on node-1', '10.10.10.11'])
skipping: [10.10.10.11] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDCIr/IW4qyd4Ls8dztCJyYHt354iPFbhLAUUiEK9R3A5W8UOSiJK/WVwlxMazH8QUaMWHuQAlTtW66kW1DDU+fsJ4xGxrNjEnwUbmWfj3BBnoANJQHYOid8iLJwWZuykvz0EIdGMDVpUpIx/qqm3/ZlC+cD0iukXQyEyAw3Qgts/Twqr5IJGeQOFy9Z4rmqSXtz/8tS0YOHCHVC5GGsUpD5+GLqhwPd64xCbWnvpYY61IX45Hzf+zO80xGqPeQLqF9HULs5wi2i6plKrSRl76VWCq9T7QMQMKJJSLUabnrXrKm+sr21LImgpSxSbqbBVVNUVS+adQvvylWb6yaFWov ansible-generated on node-1', '10.10.10.12'])
skipping: [10.10.10.11] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDCIr/IW4qyd4Ls8dztCJyYHt354iPFbhLAUUiEK9R3A5W8UOSiJK/WVwlxMazH8QUaMWHuQAlTtW66kW1DDU+fsJ4xGxrNjEnwUbmWfj3BBnoANJQHYOid8iLJwWZuykvz0EIdGMDVpUpIx/qqm3/ZlC+cD0iukXQyEyAw3Qgts/Twqr5IJGeQOFy9Z4rmqSXtz/8tS0YOHCHVC5GGsUpD5+GLqhwPd64xCbWnvpYY61IX45Hzf+zO80xGqPeQLqF9HULs5wi2i6plKrSRl76VWCq9T7QMQMKJJSLUabnrXrKm+sr21LImgpSxSbqbBVVNUVS+adQvvylWb6yaFWov ansible-generated on node-1', '10.10.10.13'])
skipping: [10.10.10.12] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQChMymmlyxGn7PnUvAUvh968/gxTnwGZhhMhIc2+aiuA0QP/D8CSmKfzRYoMVP6/nm3cJsYXM28wzWZ1X/sLp33rYYxbwWpj5n8oBalzqKmSzK0HI5CePKAlWlEeLRDxvKpZYhZwXmro5Ov9lfp63kNHU84nAP7BPBOlufFyydn50bUwP1xKEsG1BC9Xqd4XqB5+eRLjkQDuC743bgxFc3FM8fij1/MuvxtG3HvL6DgEvCo3Lx4qkiVO3akR6Lo3bQEkf76Gq94cFbecAAnYZzdkPHR5LqJiIGS0DYj0yZQXrdN+DtjpyIBfZzi+TFdcVW1Agy1IUQ7Lrt29HJw+/sD ansible-generated on node-2', '10.10.10.10'])
skipping: [10.10.10.12] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQChMymmlyxGn7PnUvAUvh968/gxTnwGZhhMhIc2+aiuA0QP/D8CSmKfzRYoMVP6/nm3cJsYXM28wzWZ1X/sLp33rYYxbwWpj5n8oBalzqKmSzK0HI5CePKAlWlEeLRDxvKpZYhZwXmro5Ov9lfp63kNHU84nAP7BPBOlufFyydn50bUwP1xKEsG1BC9Xqd4XqB5+eRLjkQDuC743bgxFc3FM8fij1/MuvxtG3HvL6DgEvCo3Lx4qkiVO3akR6Lo3bQEkf76Gq94cFbecAAnYZzdkPHR5LqJiIGS0DYj0yZQXrdN+DtjpyIBfZzi+TFdcVW1Agy1IUQ7Lrt29HJw+/sD ansible-generated on node-2', '10.10.10.11'])
skipping: [10.10.10.12] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQChMymmlyxGn7PnUvAUvh968/gxTnwGZhhMhIc2+aiuA0QP/D8CSmKfzRYoMVP6/nm3cJsYXM28wzWZ1X/sLp33rYYxbwWpj5n8oBalzqKmSzK0HI5CePKAlWlEeLRDxvKpZYhZwXmro5Ov9lfp63kNHU84nAP7BPBOlufFyydn50bUwP1xKEsG1BC9Xqd4XqB5+eRLjkQDuC743bgxFc3FM8fij1/MuvxtG3HvL6DgEvCo3Lx4qkiVO3akR6Lo3bQEkf76Gq94cFbecAAnYZzdkPHR5LqJiIGS0DYj0yZQXrdN+DtjpyIBfZzi+TFdcVW1Agy1IUQ7Lrt29HJw+/sD ansible-generated on node-2', '10.10.10.12'])
skipping: [10.10.10.12] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQChMymmlyxGn7PnUvAUvh968/gxTnwGZhhMhIc2+aiuA0QP/D8CSmKfzRYoMVP6/nm3cJsYXM28wzWZ1X/sLp33rYYxbwWpj5n8oBalzqKmSzK0HI5CePKAlWlEeLRDxvKpZYhZwXmro5Ov9lfp63kNHU84nAP7BPBOlufFyydn50bUwP1xKEsG1BC9Xqd4XqB5+eRLjkQDuC743bgxFc3FM8fij1/MuvxtG3HvL6DgEvCo3Lx4qkiVO3akR6Lo3bQEkf76Gq94cFbecAAnYZzdkPHR5LqJiIGS0DYj0yZQXrdN+DtjpyIBfZzi+TFdcVW1Agy1IUQ7Lrt29HJw+/sD ansible-generated on node-2', '10.10.10.13'])
skipping: [10.10.10.13] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCo9KBPH2DVYQrM/WZ4CO4Ipvr+5L6FhqWBr1A6C0Ms+qi77aKHwFEIbrxKqj7wZFbHWoTPt/cbWkXhZgnkfDBR81/wBImnFz0QfuL0tNDN0/YP/4cePo5bQERGcnBI6vkjmXMyGGpRQobNRj71fX/Wt5WMw6dM+d4XjfgUKHIJxEKnz8HYnkiwWm5Flc9EHKTWN+87vZ9B6cdi7gxLQu8LL3x+4e2ArRoz9u5yZIajUTvexqD2IIReqsFt+QObpinLaTc/g7Q+w/no1hAZERS3pImx9l0GF6Ktdp/HMHH1vk2cwnyogrk+OLw1WccI1YkBes/xdzBFTWOwUX3w/vBt ansible-generated on node-3', '10.10.10.10'])
skipping: [10.10.10.13] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCo9KBPH2DVYQrM/WZ4CO4Ipvr+5L6FhqWBr1A6C0Ms+qi77aKHwFEIbrxKqj7wZFbHWoTPt/cbWkXhZgnkfDBR81/wBImnFz0QfuL0tNDN0/YP/4cePo5bQERGcnBI6vkjmXMyGGpRQobNRj71fX/Wt5WMw6dM+d4XjfgUKHIJxEKnz8HYnkiwWm5Flc9EHKTWN+87vZ9B6cdi7gxLQu8LL3x+4e2ArRoz9u5yZIajUTvexqD2IIReqsFt+QObpinLaTc/g7Q+w/no1hAZERS3pImx9l0GF6Ktdp/HMHH1vk2cwnyogrk+OLw1WccI1YkBes/xdzBFTWOwUX3w/vBt ansible-generated on node-3', '10.10.10.11'])
skipping: [10.10.10.13] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCo9KBPH2DVYQrM/WZ4CO4Ipvr+5L6FhqWBr1A6C0Ms+qi77aKHwFEIbrxKqj7wZFbHWoTPt/cbWkXhZgnkfDBR81/wBImnFz0QfuL0tNDN0/YP/4cePo5bQERGcnBI6vkjmXMyGGpRQobNRj71fX/Wt5WMw6dM+d4XjfgUKHIJxEKnz8HYnkiwWm5Flc9EHKTWN+87vZ9B6cdi7gxLQu8LL3x+4e2ArRoz9u5yZIajUTvexqD2IIReqsFt+QObpinLaTc/g7Q+w/no1hAZERS3pImx9l0GF6Ktdp/HMHH1vk2cwnyogrk+OLw1WccI1YkBes/xdzBFTWOwUX3w/vBt ansible-generated on node-3', '10.10.10.12'])
skipping: [10.10.10.13] => (item=['ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCo9KBPH2DVYQrM/WZ4CO4Ipvr+5L6FhqWBr1A6C0Ms+qi77aKHwFEIbrxKqj7wZFbHWoTPt/cbWkXhZgnkfDBR81/wBImnFz0QfuL0tNDN0/YP/4cePo5bQERGcnBI6vkjmXMyGGpRQobNRj71fX/Wt5WMw6dM+d4XjfgUKHIJxEKnz8HYnkiwWm5Flc9EHKTWN+87vZ9B6cdi7gxLQu8LL3x+4e2ArRoz9u5yZIajUTvexqD2IIReqsFt+QObpinLaTc/g7Q+w/no1hAZERS3pImx9l0GF6Ktdp/HMHH1vk2cwnyogrk+OLw1WccI1YkBes/xdzBFTWOwUX3w/vBt ansible-generated on node-3', '10.10.10.13'])

TASK [postgres : Install offical pgdg yum repo] **********************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=postgresql${pg_version}*)
skipping: [10.10.10.10] => (item=postgis31_${pg_version}*)
skipping: [10.10.10.10] => (item=pgbouncer patroni pg_exporter pgbadger)
skipping: [10.10.10.11] => (item=postgresql${pg_version}*)
skipping: [10.10.10.10] => (item=patroni patroni-consul patroni-etcd pgbouncer pgbadger pg_activity)
skipping: [10.10.10.11] => (item=postgis31_${pg_version}*)
skipping: [10.10.10.10] => (item=python3 python3-psycopg2 python36-requests python3-etcd python3-consul)
skipping: [10.10.10.11] => (item=pgbouncer patroni pg_exporter pgbadger)
skipping: [10.10.10.12] => (item=postgresql${pg_version}*)
skipping: [10.10.10.10] => (item=python36-urllib3 python36-idna python36-pyOpenSSL python36-cryptography)
skipping: [10.10.10.11] => (item=patroni patroni-consul patroni-etcd pgbouncer pgbadger pg_activity)
skipping: [10.10.10.12] => (item=postgis31_${pg_version}*)
skipping: [10.10.10.11] => (item=python3 python3-psycopg2 python36-requests python3-etcd python3-consul)
skipping: [10.10.10.12] => (item=pgbouncer patroni pg_exporter pgbadger)
skipping: [10.10.10.13] => (item=postgresql${pg_version}*)
skipping: [10.10.10.11] => (item=python36-urllib3 python36-idna python36-pyOpenSSL python36-cryptography)
skipping: [10.10.10.12] => (item=patroni patroni-consul patroni-etcd pgbouncer pgbadger pg_activity)
skipping: [10.10.10.13] => (item=postgis31_${pg_version}*)
skipping: [10.10.10.12] => (item=python3 python3-psycopg2 python36-requests python3-etcd python3-consul)
skipping: [10.10.10.13] => (item=pgbouncer patroni pg_exporter pgbadger)
skipping: [10.10.10.12] => (item=python36-urllib3 python36-idna python36-pyOpenSSL python36-cryptography)
skipping: [10.10.10.13] => (item=patroni patroni-consul patroni-etcd pgbouncer pgbadger pg_activity)
skipping: [10.10.10.13] => (item=python3 python3-psycopg2 python36-requests python3-etcd python3-consul)
skipping: [10.10.10.13] => (item=python36-urllib3 python36-idna python36-pyOpenSSL python36-cryptography)

TASK [postgres : Install pg packages] ********************************************************************************************************************************************************************
changed: [10.10.10.10] => (item=['postgresql13*', 'postgis31_13*', 'pgbouncer,patroni,pg_exporter,pgbadger', 'patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography'])
changed: [10.10.10.11] => (item=['postgresql13*', 'postgis31_13*', 'pgbouncer,patroni,pg_exporter,pgbadger', 'patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography'])
changed: [10.10.10.13] => (item=['postgresql13*', 'postgis31_13*', 'pgbouncer,patroni,pg_exporter,pgbadger', 'patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography'])
changed: [10.10.10.12] => (item=['postgresql13*', 'postgis31_13*', 'pgbouncer,patroni,pg_exporter,pgbadger', 'patroni,patroni-consul,patroni-etcd,pgbouncer,pgbadger,pg_activity', 'python3,python3-psycopg2,python36-requests,python3-etcd,python3-consul', 'python36-urllib3,python36-idna,python36-pyOpenSSL,python36-cryptography'])

TASK [postgres : Install pg extensions] ******************************************************************************************************************************************************************
changed: [10.10.10.11] => (item=['pg_repack13,pg_qualstats13,pg_stat_kcache13,wal2json13'])
changed: [10.10.10.10] => (item=['pg_repack13,pg_qualstats13,pg_stat_kcache13,wal2json13'])
changed: [10.10.10.13] => (item=['pg_repack13,pg_qualstats13,pg_stat_kcache13,wal2json13'])
changed: [10.10.10.12] => (item=['pg_repack13,pg_qualstats13,pg_stat_kcache13,wal2json13'])

TASK [postgres : Link /usr/pgsql to current version] *****************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Add pg bin dir to profile path] *********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Fix directory ownership] ****************************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Remove default postgres service] ********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Check necessary variables exists] *******************************************************************************************************************************************************
ok: [10.10.10.10] => {
    "changed": false,
    "msg": "All assertions passed"
}
ok: [10.10.10.11] => {
    "changed": false,
    "msg": "All assertions passed"
}
ok: [10.10.10.12] => {
    "changed": false,
    "msg": "All assertions passed"
}
ok: [10.10.10.13] => {
    "changed": false,
    "msg": "All assertions passed"
}

TASK [postgres : Fetch variables via pg_cluster] *********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Set cluster basic facts for hosts] ******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Assert cluster primary singleton] *******************************************************************************************************************************************************
ok: [10.10.10.10] => {
    "changed": false,
    "msg": "All assertions passed"
}
ok: [10.10.10.11] => {
    "changed": false,
    "msg": "All assertions passed"
}
ok: [10.10.10.12] => {
    "changed": false,
    "msg": "All assertions passed"
}
ok: [10.10.10.13] => {
    "changed": false,
    "msg": "All assertions passed"
}

TASK [postgres : Setup cluster primary ip address] *******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Setup repl upstream for primary] ********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Setup repl upstream for replicas] *******************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Debug print instance summary] ***********************************************************************************************************************************************************
ok: [10.10.10.10] => {
    "msg": "cluster=pg-meta service=pg-meta-primary instance=pg-meta-1 replication=[primary:itself]->10.10.10.10"
}
ok: [10.10.10.11] => {
    "msg": "cluster=pg-test service=pg-test-primary instance=pg-test-1 replication=[primary:itself]->10.10.10.11"
}
ok: [10.10.10.12] => {
    "msg": "cluster=pg-test service=pg-test-replica instance=pg-test-2 replication=[primary:itself]->10.10.10.12"
}
ok: [10.10.10.13] => {
    "msg": "cluster=pg-test service=pg-test-offline instance=pg-test-3 replication=[primary:itself]->10.10.10.13"
}

TASK [postgres : Check for existing postgres instance] ***************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Set fact whether pg port is open] *******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Abort due to existing postgres instance] ************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Clean existing postgres instance] *******************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Shutdown existing postgres service] *****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Remove registerd consul service] ********************************************************************************************************************************************************
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.10]

TASK [postgres : Remove postgres metadata in consul] *****************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.10]

TASK [postgres : Remove existing postgres data] **********************************************************************************************************************************************************
ok: [10.10.10.10] => (item=/pg)
ok: [10.10.10.11] => (item=/pg)
ok: [10.10.10.12] => (item=/pg)
ok: [10.10.10.13] => (item=/pg)
ok: [10.10.10.10] => (item=/export/postgres)
ok: [10.10.10.11] => (item=/export/postgres)
ok: [10.10.10.12] => (item=/export/postgres)
ok: [10.10.10.13] => (item=/export/postgres)
ok: [10.10.10.10] => (item=/var/backups/postgres)
ok: [10.10.10.11] => (item=/var/backups/postgres)
ok: [10.10.10.12] => (item=/var/backups/postgres)
ok: [10.10.10.13] => (item=/var/backups/postgres)
changed: [10.10.10.10] => (item=/etc/pgbouncer)
changed: [10.10.10.11] => (item=/etc/pgbouncer)
changed: [10.10.10.13] => (item=/etc/pgbouncer)
changed: [10.10.10.12] => (item=/etc/pgbouncer)
changed: [10.10.10.10] => (item=/var/log/pgbouncer)
changed: [10.10.10.11] => (item=/var/log/pgbouncer)
changed: [10.10.10.13] => (item=/var/log/pgbouncer)
changed: [10.10.10.12] => (item=/var/log/pgbouncer)
changed: [10.10.10.10] => (item=/var/run/pgbouncer)
changed: [10.10.10.11] => (item=/var/run/pgbouncer)
changed: [10.10.10.13] => (item=/var/run/pgbouncer)
changed: [10.10.10.12] => (item=/var/run/pgbouncer)

TASK [postgres : Make sure main and backup dir exists] ***************************************************************************************************************************************************
changed: [10.10.10.11] => (item=/export)
changed: [10.10.10.12] => (item=/export)
changed: [10.10.10.13] => (item=/export)
changed: [10.10.10.10] => (item=/export)
changed: [10.10.10.11] => (item=/var/backups)
changed: [10.10.10.12] => (item=/var/backups)
changed: [10.10.10.13] => (item=/var/backups)
changed: [10.10.10.10] => (item=/var/backups)

TASK [postgres : Create postgres directory structure] ****************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/export/postgres)
changed: [10.10.10.11] => (item=/export/postgres)
changed: [10.10.10.12] => (item=/export/postgres)
changed: [10.10.10.13] => (item=/export/postgres)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/bin)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/bin)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/bin)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/bin)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/log)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/log)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/log)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/log)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/tmp)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/tmp)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/tmp)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/tmp)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/conf)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/conf)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/conf)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/conf)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/data)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/data)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/data)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/data)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/meta)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/meta)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/meta)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/meta)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/stat)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/stat)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/stat)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/stat)
changed: [10.10.10.10] => (item=/export/postgres/pg-meta-13/change)
changed: [10.10.10.12] => (item=/export/postgres/pg-test-13/change)
changed: [10.10.10.11] => (item=/export/postgres/pg-test-13/change)
changed: [10.10.10.13] => (item=/export/postgres/pg-test-13/change)
changed: [10.10.10.10] => (item=/var/backups/postgres/pg-meta-13/postgres)
changed: [10.10.10.12] => (item=/var/backups/postgres/pg-test-13/postgres)
changed: [10.10.10.11] => (item=/var/backups/postgres/pg-test-13/postgres)
changed: [10.10.10.13] => (item=/var/backups/postgres/pg-test-13/postgres)
changed: [10.10.10.10] => (item=/var/backups/postgres/pg-meta-13/arcwal)
changed: [10.10.10.12] => (item=/var/backups/postgres/pg-test-13/arcwal)
changed: [10.10.10.11] => (item=/var/backups/postgres/pg-test-13/arcwal)
changed: [10.10.10.13] => (item=/var/backups/postgres/pg-test-13/arcwal)
changed: [10.10.10.10] => (item=/var/backups/postgres/pg-meta-13/backup)
changed: [10.10.10.12] => (item=/var/backups/postgres/pg-test-13/backup)
changed: [10.10.10.11] => (item=/var/backups/postgres/pg-test-13/backup)
changed: [10.10.10.13] => (item=/var/backups/postgres/pg-test-13/backup)
changed: [10.10.10.10] => (item=/var/backups/postgres/pg-meta-13/remote)
changed: [10.10.10.12] => (item=/var/backups/postgres/pg-test-13/remote)
changed: [10.10.10.11] => (item=/var/backups/postgres/pg-test-13/remote)
changed: [10.10.10.13] => (item=/var/backups/postgres/pg-test-13/remote)

TASK [postgres : Create pgbouncer directory structure] ***************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/etc/pgbouncer)
changed: [10.10.10.11] => (item=/etc/pgbouncer)
changed: [10.10.10.12] => (item=/etc/pgbouncer)
changed: [10.10.10.13] => (item=/etc/pgbouncer)
changed: [10.10.10.11] => (item=/var/log/pgbouncer)
changed: [10.10.10.10] => (item=/var/log/pgbouncer)
changed: [10.10.10.12] => (item=/var/log/pgbouncer)
changed: [10.10.10.13] => (item=/var/log/pgbouncer)
changed: [10.10.10.11] => (item=/var/run/pgbouncer)
changed: [10.10.10.10] => (item=/var/run/pgbouncer)
changed: [10.10.10.12] => (item=/var/run/pgbouncer)
changed: [10.10.10.13] => (item=/var/run/pgbouncer)

TASK [postgres : Create links from pgbkup to pgroot] *****************************************************************************************************************************************************
changed: [10.10.10.10] => (item=arcwal)
changed: [10.10.10.11] => (item=arcwal)
changed: [10.10.10.12] => (item=arcwal)
changed: [10.10.10.13] => (item=arcwal)
changed: [10.10.10.10] => (item=backup)
changed: [10.10.10.11] => (item=backup)
changed: [10.10.10.12] => (item=backup)
changed: [10.10.10.13] => (item=backup)
changed: [10.10.10.10] => (item=remote)
changed: [10.10.10.11] => (item=remote)
changed: [10.10.10.12] => (item=remote)
changed: [10.10.10.13] => (item=remote)

TASK [postgres : Create links from current cluster] ******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.11]

TASK [postgres : Copy pg_cluster to /pg/meta/cluster] ****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Copy pg_version to /pg/meta/version] ****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Copy pg_instance to /pg/meta/instance] **************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Copy pg_seq to /pg/meta/sequence] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Copy pg_role to /pg/meta/role] **********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Copy postgres scripts to /pg/bin/] ******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Copy alias profile to /etc/profile.d] ***************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Copy psqlrc to postgres home] ***********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Setup hostname to pg instance name] *****************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Copy consul node-meta definition] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Restart consul to load new node-meta] ***************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [postgres : Config patroni watchdog support] ********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Get config parameter page count] ********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Get config parameter page size] *********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [postgres : Tune shared buffer and work mem] ********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Hanlde small size mem occasion] *********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Calculate postgres mem params] **********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : create patroni config dir] **************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : use predefined patroni template] ********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Render default /pg/conf/patroni.yml] ****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Link /pg/conf/patroni to /pg/bin/] ******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Link /pg/bin/patroni.yml to /etc/patroni/] **********************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Config patroni watchdog support] ********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Copy patroni systemd service file] ******************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : create patroni systemd drop-in dir] *****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Copy postgres systemd service file] *****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Drop-In consul dependency for patroni] **************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Render default initdb scripts] **********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [postgres : Launch patroni on primary instance] *****************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Wait for patroni primary online] ********************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
ok: [10.10.10.10]
ok: [10.10.10.11]

TASK [postgres : Wait for postgres primary online] *******************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
ok: [10.10.10.10]
ok: [10.10.10.11]

TASK [postgres : Check primary postgres service ready] ***************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
[WARNING]: Module remote_tmp /var/lib/pgsql/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir
with the correct permissions manually
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Check replication connectivity to primary] **********************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Render init roles sql] ******************************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Render init template sql] ***************************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Render default pg-init scripts] *********************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.10]

TASK [postgres : Execute initialization scripts] *********************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Check primary instance ready] ***********************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Add dbsu password to pgpass if exists] **************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Add system user to pgpass] **************************************************************************************************************************************************************
changed: [10.10.10.10] => (item={'username': 'replicator', 'password': 'DBUser.Replicator'})
changed: [10.10.10.11] => (item={'username': 'replicator', 'password': 'DBUser.Replicator'})
changed: [10.10.10.12] => (item={'username': 'replicator', 'password': 'DBUser.Replicator'})
changed: [10.10.10.13] => (item={'username': 'replicator', 'password': 'DBUser.Replicator'})
changed: [10.10.10.11] => (item={'username': 'dbuser_monitor', 'password': 'DBUser.Monitor'})
changed: [10.10.10.10] => (item={'username': 'dbuser_monitor', 'password': 'DBUser.Monitor'})
changed: [10.10.10.13] => (item={'username': 'dbuser_monitor', 'password': 'DBUser.Monitor'})
changed: [10.10.10.12] => (item={'username': 'dbuser_monitor', 'password': 'DBUser.Monitor'})
changed: [10.10.10.13] => (item={'username': 'dbuser_admin', 'password': 'DBUser.Admin'})
changed: [10.10.10.12] => (item={'username': 'dbuser_admin', 'password': 'DBUser.Admin'})
changed: [10.10.10.10] => (item={'username': 'dbuser_admin', 'password': 'DBUser.Admin'})
changed: [10.10.10.11] => (item={'username': 'dbuser_admin', 'password': 'DBUser.Admin'})

TASK [postgres : Check replication connectivity to primary] **********************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Launch patroni on replica instances] ****************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Wait for patroni replica online] ********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Wait for postgres replica online] *******************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Check replica postgres service ready] ***************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Render hba rules] ***********************************************************************************************************************************************************************
changed: [10.10.10.13]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]

TASK [postgres : Reload hba rules] ***********************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Pause patroni] **************************************************************************************************************************************************************************
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.10]

TASK [postgres : Stop patroni on replica instance] *******************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Stop patroni on primary instance] *******************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Launch raw postgres on primary] *********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Launch raw postgres on primary] *********************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Wait for postgres online] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Check pgbouncer is installed] ***********************************************************************************************************************************************************
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [postgres : Stop existing pgbouncer service] ********************************************************************************************************************************************************
ok: [10.10.10.11]
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Remove existing pgbouncer dirs] *********************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/etc/pgbouncer)
changed: [10.10.10.12] => (item=/etc/pgbouncer)
changed: [10.10.10.13] => (item=/etc/pgbouncer)
changed: [10.10.10.11] => (item=/etc/pgbouncer)
changed: [10.10.10.10] => (item=/var/log/pgbouncer)
changed: [10.10.10.12] => (item=/var/log/pgbouncer)
changed: [10.10.10.13] => (item=/var/log/pgbouncer)
changed: [10.10.10.11] => (item=/var/log/pgbouncer)
changed: [10.10.10.10] => (item=/var/run/pgbouncer)
changed: [10.10.10.12] => (item=/var/run/pgbouncer)
changed: [10.10.10.13] => (item=/var/run/pgbouncer)
changed: [10.10.10.11] => (item=/var/run/pgbouncer)

TASK [postgres : Recreate dirs with owner postgres] ******************************************************************************************************************************************************
changed: [10.10.10.10] => (item=/etc/pgbouncer)
changed: [10.10.10.11] => (item=/etc/pgbouncer)
changed: [10.10.10.12] => (item=/etc/pgbouncer)
changed: [10.10.10.13] => (item=/etc/pgbouncer)
changed: [10.10.10.10] => (item=/var/log/pgbouncer)
changed: [10.10.10.12] => (item=/var/log/pgbouncer)
changed: [10.10.10.11] => (item=/var/log/pgbouncer)
changed: [10.10.10.13] => (item=/var/log/pgbouncer)
changed: [10.10.10.10] => (item=/var/run/pgbouncer)
changed: [10.10.10.12] => (item=/var/run/pgbouncer)
changed: [10.10.10.11] => (item=/var/run/pgbouncer)
changed: [10.10.10.13] => (item=/var/run/pgbouncer)

TASK [postgres : Copy /etc/pgbouncer/pgbouncer.ini] ******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [postgres : Copy /etc/pgbouncer/pgb_hba.conf] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Touch userlist and database list] *******************************************************************************************************************************************************
changed: [10.10.10.10] => (item=database.txt)
changed: [10.10.10.11] => (item=database.txt)
changed: [10.10.10.12] => (item=database.txt)
changed: [10.10.10.13] => (item=database.txt)
changed: [10.10.10.10] => (item=userlist.txt)
changed: [10.10.10.11] => (item=userlist.txt)
changed: [10.10.10.12] => (item=userlist.txt)
changed: [10.10.10.13] => (item=userlist.txt)

TASK [postgres : Add default users to pgbouncer] *********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [postgres : Copy pgbouncer systemd service] *********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [postgres : Launch pgbouncer pool service] **********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [postgres : Wait for pgbouncer service online] ******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [postgres : Check pgbouncer service is ready] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : include_tasks] **************************************************************************************************************************************************************************
included: /private/tmp/pigsty/roles/postgres/tasks/createuser.yml for 10.10.10.10 => (item={'name': 'dbuser_meta', 'password': 'DBUser.Meta', 'login': True, 'superuser': False, 'createdb': False, 'createrole': False, 'inherit': True, 'replication': False, 'bypassrls': False, 'connlimit': -1, 'expire_at': '2030-12-31', 'expire_in': 365, 'roles': ['dbrole_readwrite'], 'pgbouncer': True, 'parameters': {'search_path': 'public'}, 'comment': 'test user'})
included: /private/tmp/pigsty/roles/postgres/tasks/createuser.yml for 10.10.10.10 => (item={'name': 'dbuser_vonng2', 'password': 'DBUser.Vonng', 'roles': ['dbrole_offline'], 'expire_in': 365, 'pgbouncer': False, 'comment': 'example personal user for interactive queries'})
included: /private/tmp/pigsty/roles/postgres/tasks/createuser.yml for 10.10.10.11, 10.10.10.12, 10.10.10.13 => (item={'name': 'test', 'password': 'test', 'roles': ['dbrole_readwrite'], 'pgbouncer': True, 'comment': 'default test user for production usage'})

TASK [postgres : Render user dbuser_meta creation sql] ***************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Execute user dbuser_meta creation sql on primary] ***************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Add user to pgbouncer] ******************************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Render user dbuser_vonng2 creation sql] *************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Execute user dbuser_vonng2 creation sql on primary] *************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Add user to pgbouncer] ******************************************************************************************************************************************************************
skipping: [10.10.10.10]

TASK [postgres : Render user test creation sql] **********************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]

TASK [postgres : Execute user test creation sql on primary] **********************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]

TASK [postgres : Add user to pgbouncer] ******************************************************************************************************************************************************************
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [postgres : include_tasks] **************************************************************************************************************************************************************************
included: /private/tmp/pigsty/roles/postgres/tasks/createdb.yml for 10.10.10.10 => (item={'name': 'meta', 'allowconn': True, 'revokeconn': False, 'connlimit': -1, 'extensions': [{'name': 'postgis', 'schema': 'public'}], 'parameters': {'enable_partitionwise_join': True}, 'pgbouncer': True, 'comment': 'pigsty meta database'})
included: /private/tmp/pigsty/roles/postgres/tasks/createdb.yml for 10.10.10.11, 10.10.10.12, 10.10.10.13 => (item={'name': 'test'})

TASK [postgres : debug] **********************************************************************************************************************************************************************************
ok: [10.10.10.10] => {
    "msg": {
        "allowconn": true,
        "comment": "pigsty meta database",
        "connlimit": -1,
        "extensions": [
            {
                "name": "postgis",
                "schema": "public"
            }
        ],
        "name": "meta",
        "parameters": {
            "enable_partitionwise_join": true
        },
        "pgbouncer": true,
        "revokeconn": false
    }
}

TASK [postgres : Render database meta creation sql] ******************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Render database meta baseline sql] ******************************************************************************************************************************************************
skipping: [10.10.10.10]

TASK [postgres : Execute database meta creation command] *************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Execute database meta creation sql] *****************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : Execute database meta creation sql] *****************************************************************************************************************************************************
skipping: [10.10.10.10]

TASK [postgres : Add pgbouncer busniess database] ********************************************************************************************************************************************************
changed: [10.10.10.10]

TASK [postgres : debug] **********************************************************************************************************************************************************************************
ok: [10.10.10.11] => {
    "msg": {
        "name": "test"
    }
}
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Render database test creation sql] ******************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]

TASK [postgres : Render database test baseline sql] ******************************************************************************************************************************************************
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Execute database test creation command] *************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]

TASK [postgres : Execute database test creation sql] *****************************************************************************************************************************************************
skipping: [10.10.10.12]
skipping: [10.10.10.13]
changed: [10.10.10.11]

TASK [postgres : Execute database test creation sql] *****************************************************************************************************************************************************
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [postgres : Add pgbouncer busniess database] ********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [postgres : Reload pgbouncer to add db and users] ***************************************************************************************************************************************************
changed: [10.10.10.13]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.11]

TASK [postgres : Copy pg service definition to consul] ***************************************************************************************************************************************************
changed: [10.10.10.10] => (item=postgres)
changed: [10.10.10.11] => (item=postgres)
changed: [10.10.10.12] => (item=postgres)
changed: [10.10.10.13] => (item=postgres)
changed: [10.10.10.10] => (item=pgbouncer)
changed: [10.10.10.11] => (item=pgbouncer)
changed: [10.10.10.12] => (item=pgbouncer)
changed: [10.10.10.13] => (item=pgbouncer)
changed: [10.10.10.10] => (item=patroni)
changed: [10.10.10.11] => (item=patroni)
changed: [10.10.10.12] => (item=patroni)
changed: [10.10.10.13] => (item=patroni)

TASK [postgres : Reload postgres consul service] *********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [postgres : Render grafana datasource definition] ***************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [postgres : Register datasource to grafana] *********************************************************************************************************************************************************
[WARNING]: Consider using the get_url or uri module rather than running 'curl'.  If you need to use command because get_url or uri is insufficient you can add 'warn: false' to this command task or set
'command_warnings=False' in ansible.cfg to get rid of this message.
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [monitor : Install exporter yum repo] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [monitor : Install node_exporter and pg_exporter] ***************************************************************************************************************************************************
skipping: [10.10.10.10] => (item=node_exporter)
skipping: [10.10.10.10] => (item=pg_exporter)
skipping: [10.10.10.11] => (item=node_exporter)
skipping: [10.10.10.11] => (item=pg_exporter)
skipping: [10.10.10.12] => (item=node_exporter)
skipping: [10.10.10.12] => (item=pg_exporter)
skipping: [10.10.10.13] => (item=node_exporter)
skipping: [10.10.10.13] => (item=pg_exporter)

TASK [monitor : Copy node_exporter binary] ***************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [monitor : Copy pg_exporter binary] *****************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [monitor : Create /etc/pg_exporter conf dir] ********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [monitor : Copy default pg_exporter.yaml] ***********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [monitor : Config /etc/default/pg_exporter] *********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [monitor : Config pg_exporter service unit] *********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [monitor : Launch pg_exporter systemd service] ******************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [monitor : Wait for pg_exporter service online] *****************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.11]
ok: [10.10.10.13]

TASK [monitor : Register pg-exporter consul service] *****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [monitor : Reload pg-exporter consul service] *******************************************************************************************************************************************************
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.10]

TASK [monitor : Config pgbouncer_exporter opts] **********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [monitor : Config pgbouncer_exporter service] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [monitor : Launch pgbouncer_exporter service] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.12]

TASK [monitor : Wait for pgbouncer_exporter online] ******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [monitor : Register pgb-exporter consul service] ****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.12]

TASK [monitor : Reload pgb-exporter consul service] ******************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [monitor : Copy node_exporter systemd service] ******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [monitor : Config default node_exporter options] ****************************************************************************************************************************************************
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [monitor : Launch node_exporter service unit] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.11]

TASK [monitor : Wait for node_exporter online] ***********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [monitor : Register node-exporter service to consul] ************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [monitor : Reload node-exporter consul service] *****************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [service : Make sure haproxy is installed] **********************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [service : Create haproxy directory] ****************************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.13]
ok: [10.10.10.11]

TASK [service : Copy haproxy systemd service file] *******************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.11]

TASK [service : Fetch postgres cluster memberships] ******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.11]
ok: [10.10.10.12]
ok: [10.10.10.13]

TASK [service : Templating /etc/haproxy/haproxy.cfg] *****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.13]
changed: [10.10.10.11]
changed: [10.10.10.12]

TASK [service : Launch haproxy load balancer service] ****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.13]
changed: [10.10.10.11]

TASK [service : Wait for haproxy load balancer online] ***************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.12]
ok: [10.10.10.11]
ok: [10.10.10.13]

TASK [service : Reload haproxy load balancer service] ****************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.13]
changed: [10.10.10.12]
changed: [10.10.10.11]

TASK [service : Copy haproxy exporter definition] ********************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.10]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [service : Copy haproxy service definition] *********************************************************************************************************************************************************
changed: [10.10.10.12] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
changed: [10.10.10.10] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
changed: [10.10.10.11] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
changed: [10.10.10.13] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
changed: [10.10.10.10] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
changed: [10.10.10.12] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
changed: [10.10.10.13] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
changed: [10.10.10.11] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
changed: [10.10.10.10] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
changed: [10.10.10.12] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
changed: [10.10.10.11] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
changed: [10.10.10.13] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
changed: [10.10.10.10] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})
changed: [10.10.10.12] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})
changed: [10.10.10.11] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})
changed: [10.10.10.13] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})

TASK [service : Reload haproxy consul service] ***********************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [service : Make sure vip-manager is installed] ******************************************************************************************************************************************************
ok: [10.10.10.10]
ok: [10.10.10.13]
ok: [10.10.10.11]
ok: [10.10.10.12]

TASK [service : Copy vip-manager systemd service file] ***************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.12]
changed: [10.10.10.11]
changed: [10.10.10.13]

TASK [service : create vip-manager systemd drop-in dir] **************************************************************************************************************************************************
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.10]
changed: [10.10.10.13]

TASK [service : create vip-manager systemd drop-in file] *************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.13]
changed: [10.10.10.12]
changed: [10.10.10.11]

TASK [service : Templating /etc/default/vip-manager.yml] *************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.12]
changed: [10.10.10.13]

TASK [service : Launch vip-manager] **********************************************************************************************************************************************************************
changed: [10.10.10.10]
changed: [10.10.10.11]
changed: [10.10.10.13]
changed: [10.10.10.12]

TASK [service : Fetch postgres cluster memberships] ******************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

TASK [service : Render L4 VIP configs] *******************************************************************************************************************************************************************
skipping: [10.10.10.10] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
skipping: [10.10.10.10] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
skipping: [10.10.10.10] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
skipping: [10.10.10.11] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
skipping: [10.10.10.10] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})
skipping: [10.10.10.11] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
skipping: [10.10.10.11] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
skipping: [10.10.10.12] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
skipping: [10.10.10.11] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})
skipping: [10.10.10.12] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
skipping: [10.10.10.13] => (item={'name': 'primary', 'src_ip': '*', 'src_port': 5433, 'dst_port': 'pgbouncer', 'check_url': '/primary', 'selector': '[]'})
skipping: [10.10.10.12] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
skipping: [10.10.10.13] => (item={'name': 'replica', 'src_ip': '*', 'src_port': 5434, 'dst_port': 'pgbouncer', 'check_url': '/read-only', 'selector': '[]', 'selector_backup': '[? pg_role == `primary`]'})
skipping: [10.10.10.12] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})
skipping: [10.10.10.13] => (item={'name': 'default', 'src_ip': '*', 'src_port': 5436, 'dst_port': 'postgres', 'check_method': 'http', 'check_port': 'patroni', 'check_url': '/primary', 'check_code': 200, 'selector': '[]', 'haproxy': {'maxconn': 3000, 'balance': 'roundrobin', 'default_server_options': 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'}})
skipping: [10.10.10.13] => (item={'name': 'offline', 'src_ip': '*', 'src_port': 5438, 'dst_port': 'postgres', 'check_url': '/replica', 'selector': '[? pg_role == `offline` || pg_offline_query ]', 'selector_backup': '[? pg_role == `replica` && !pg_offline_query]'})

TASK [service : include_tasks] ***************************************************************************************************************************************************************************
skipping: [10.10.10.10]
skipping: [10.10.10.11]
skipping: [10.10.10.12]
skipping: [10.10.10.13]

PLAY RECAP ***********************************************************************************************************************************************************************************************
10.10.10.10                : ok=264  changed=205  unreachable=0    failed=0    skipped=62   rescued=0    ignored=0
10.10.10.11                : ok=182  changed=146  unreachable=0    failed=0    skipped=55   rescued=0    ignored=0
10.10.10.12                : ok=171  changed=135  unreachable=0    failed=0    skipped=66   rescued=0    ignored=0
10.10.10.13                : ok=171  changed=135  unreachable=0    failed=0    skipped=66   rescued=0    ignored=0

烈建议在第一次完成初始化后执行 make cache 命令，该命令会将下载好的软件打为离线缓存包，并放置于files/pkg.tgz中。这样当下一次创建新的pigsty环境时，只要宿主机内操作系统一致，就可以直接复用该离线包，省去大量下载时间。

mon-view

初始化完毕后，您可以通过浏览器访问 http://pigsty 前往监控系统主页。默认的用户名与密码均为admin

如果没有配置DNS，或者没有使用默认的IP地址，也可以直接访问 http://meta_ip_address:3000前往监控系统首页。

$ make mon-view
open -n 'http://g.pigsty/'

Last modified 2021-03-28: update en docs (f994b54)